high pedal

[SpeedRacerXX1]

put a spec 3 + clutch & p.p. also w the fiore firewall adj. and quad.
fiore firewall adj. is all the way out that it hits the valve covers. and the pedal travel the clucth lets out at the height of the brake pedals height. need some help on how to adjust the clutch, to get the pedal closer to the floor, or near the floor and not so high up.

 

[SpeedRacerXX1]

anyone know how to get in touch with fiore so i can ask him

 

[RealBadDude]

is the cable adjustable? if so there is a threaded end on the clutch side.... also if your quadrent is the "double hook" then move it to the other hook.

 

[SpectorV]

the only way you can adjust the petal to get it closer to the floor is to lower the bump stop that the clutch petal has to keep it lower while still allowing you to keep the tension on the clutch cable that is needed. Maximum motorsport makes a kid for like 20 bucks to do this. Make SURE you adjust your clutch correctly, you should have about half an inch of travel (not flop but actual travel of the petal) in before the car starts to slip (rips go up) so just go driving and hold the gas constant with your foot and ease in the clutch and if you go half an inch or a tad more before the rpms slip you should be good to go.