High HP 4v parts (cnc heads, rods, cams, inj driver, etc) Updated +pics & more parts!
First of all, I want to say that I've been in the mustang community for quite some time and appreciate everyone that has done business in the past with me. Thank you! The only reason I am selling these parts is that in my current motor that is in the car made more power than I expected and I am content with its power level and I need to put a new transmission in the car.
Here are a set of after-market regrinds that I was planning on running with these heads. They are not large cams, but they are the equivalent of running .050 more lift than stock 96-98 cobra cams, which is what I wanted in a turbo car. I would definitely run a stronger valve spring with these cams. They have some very light surface rust which will be removed before sending due to storage. I wanting $350 for these cams.
Cam card - http://i259.photobucket.com/albums/hh283/breakinparts/0022.jpg
This item is a seemingly unused AEM injector driver. See pictures for part number. The wire ends look to never have been installed and all indications are that this is brand new. I was going to use this on my E85 car for larger injectors, but decided to keep the power at a reasonably safe level instead. This driver pretty much opens up any injector size that you would ever want to run. I am wanting $175 for this.
I also have a spare 4 bolt 90mm lightning maf. There is absolutely nothing wrong with this maf. They are 200+ shipping new from FRPP. 6 pin connector. I am looking to get $80 shipped
96 Cobra flywheel, resurfaced just a few months ago... $50
97 Cobra flywheel, not resurfaced, 80k miles $35
I also have a stock 97 Cobra alternator. This has been tested and verified that it is good. I ran this in my car, but due to a lot of extra electrical components I am looking to upgrade. Looking for $80 obo for this.
Prices are negotiable. Some more than others
First of all, I want to say that I've been in the mustang community for quite some time and appreciate everyone that has done business in the past with me. Thank you! The only reason I am selling these parts is that in my current motor that is in the car made more power than I expected and I am content with its power level and I need to put a new transmission in the car.
Here are a set of after-market regrinds that I was planning on running with these heads. They are not large cams, but they are the equivalent of running .050 more lift than stock 96-98 cobra cams, which is what I wanted in a turbo car. I would definitely run a stronger valve spring with these cams. They have some very light surface rust which will be removed before sending due to storage. I wanting $350 for these cams.
Cam card - http://i259.photobucket.com/albums/hh283/breakinparts/0022.jpg
This item is a seemingly unused AEM injector driver. See pictures for part number. The wire ends look to never have been installed and all indications are that this is brand new. I was going to use this on my E85 car for larger injectors, but decided to keep the power at a reasonably safe level instead. This driver pretty much opens up any injector size that you would ever want to run. I am wanting $175 for this.
I also have a spare 4 bolt 90mm lightning maf. There is absolutely nothing wrong with this maf. They are 200+ shipping new from FRPP. 6 pin connector. I am looking to get $80 shipped
96 Cobra flywheel, resurfaced just a few months ago... $50
97 Cobra flywheel, not resurfaced, 80k miles $35
I also have a stock 97 Cobra alternator. This has been tested and verified that it is good. I ran this in my car, but due to a lot of extra electrical components I am looking to upgrade. Looking for $80 obo for this.
Prices are negotiable. Some more than others
Last edited:
