Hey nitrous gurus, what am I missing from my kit? Help!

[REDFIREKNIGHT]

Well it is going to be a home put together kit since it was givin to me as a favor that I did.

Here is what I have so far:

1. The Bottle
2. Bottle nut adapter
3. Bottle tefflon washer
4. Soft plume nozzle
5. soft plume nozzle adapter nut
6. nitrous solenoid
7. 2 ft. 3AN Hose (Blue)
8. Fuel Solenoid
9. couple Flare Jets (I think a 38 & 48) but I might get new ones
10. 16 ft. 4AN Hose (Blue)
11. 1 ft. 4AN Hose (Red)

I know that I would need a toggle switch & some sort of activation switch but I might look into WOT window switch.

What pills would I need to get into a 100 shot?
And also I am not sure if I have the fuel & Nitrous filters but I will get new ones just incase.

Also, would you recommend a fuel pressure safety switch??

Thanks.

 

[REDFIREKNIGHT]

Anyone???

 

[04MystiCobra]

Bottle warmer, MSD window switch, mount brackets, relay and maybe purge. You can use the FP safety switch if you want. I used my DJWBC and used my a/f mix as a safety switch.
Checkout Dynotunes site. It has a calculator for pill sizes.

 

[mysticalsnake]

if i remember correctly NX has a chart that you can look at that gives you the pill sizes for n20 and fuel both. Also, if i remember correctly, the size for the n20 jet is .52 for the 100 shot. Not 100% positive though

 

[01SN8K]

you may also need another fuel line, to go from the solenoid to the nozzle. you have all the nitrous lines, the 16ft from the bottle to the solenoid and a 4ft from solenoid to the nozzle. the fuel is missing one. there should be a line from the schraeder valve to the solenoid and the second to the nozzle itself.
http://www.nitrousforum.com/forums/showthread.php?t=15