Help with Apten removal....

[CountySoldier]

The instructions from Apten say to remove the lower intake bolts (gold) however, from all the pictures i've seen it looks like they are still in place...do they need to come out? Or is it just the top (silver) ones?

 

[dougwg]

remove the lower bolts first... then tilt the blower up and remove the coolant block from the front of the lower intake, lput the blower back down , then remove the bolts on top ... then just lift the blower off the car...

Hope this helps

Doug

 

[CountySoldier]

Thanks Doug...I just didn't want to take the lowers out if I didn't have to!

 

[dougwg]

then you will have to remove the cross bar that goes across the front of the engine... you have to remove the coolant block one way or another

there's the 2 diff ways to do it... pick your poison

 

[CountySoldier]

Gottcha....thanks again!

 

[dougwg]

NP