Home
What's new
Latest activity
Authors
Store
Latest reviews
Search products
Forums
New posts
Search forums
What's new
New posts
New listings
New products
New profile posts
Latest activity
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
Cart
Cart
Loading…
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Search titles only
By:
Menu
Log in
Register
Navigation
Install the app
Install
More options
Change style
Contact us
Close Menu
Forums
Cobra Forums
The Terminator
Engine/Tuning
Help needed on lethal return system
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="black03" data-source="post: 13230677" data-attributes="member: 4037"><p>The instructions for the PTFE hose are definitely included in the main installation guide for the system. You just need to scroll down a bit and you'll see them. At the bottom of the instructions you'll also see color photos of the PTFE setup installed on my personal 03 cobra. </p><p></p><p>Let me know if there's anything else we can help you with. </p><p></p><p>NOTE: Fragola PTFE Fuel Hose Upgrade Users</p><p>If you upgraded to the Fragola PTFE fuel hose you will receive 6 pieces of hose</p><p>which already have the fittings installed on them.</p><p>(2) -10an Hoses</p><p>(4) -8an Hoses</p><p>The longer -10an section goes from the fuel hat to the filter. It’s run along the drivetrain tunnel towards the front of the car to where it gets re-routed towards the drivers side frame rail. The filter gets located just under the drivers side seat on the inside of the subframe.</p><p>The shorter section of -10an hose goes from the filter to the regulator and is run into the engine bay along the subframe into the engine bay just behind the drivers side strut tower where the regulator gets mounted.</p><p>The shortest section of -8an hose goes from the regulator to the Y-block which gets mounted on the firewall.</p><p>From the Y-block you’ll route the (2) -8an hoses with 90deg hose ends on them to the front of each rail. The shorter of the 2 hoses goes on the drivers side. The longer piece gets routed along the drivers side coil cover and across the front of the engine/supercharger along the coolant tubes. It’s then connected to the passenger side rail. Use zip ties to safely secure the fuel hose on the coolant line away from any other moving parts such as the supercharger pulley and belts.</p><p>Lastly the longest piece of -8an hose runs from the bottom of the regulator (return port) to the fuel hat following the same hose routing as the feed line did.</p></blockquote><p></p>
[QUOTE="black03, post: 13230677, member: 4037"] The instructions for the PTFE hose are definitely included in the main installation guide for the system. You just need to scroll down a bit and you'll see them. At the bottom of the instructions you'll also see color photos of the PTFE setup installed on my personal 03 cobra. Let me know if there's anything else we can help you with. NOTE: Fragola PTFE Fuel Hose Upgrade Users If you upgraded to the Fragola PTFE fuel hose you will receive 6 pieces of hose which already have the fittings installed on them. (2) -10an Hoses (4) -8an Hoses The longer -10an section goes from the fuel hat to the filter. It’s run along the drivetrain tunnel towards the front of the car to where it gets re-routed towards the drivers side frame rail. The filter gets located just under the drivers side seat on the inside of the subframe. The shorter section of -10an hose goes from the filter to the regulator and is run into the engine bay along the subframe into the engine bay just behind the drivers side strut tower where the regulator gets mounted. The shortest section of -8an hose goes from the regulator to the Y-block which gets mounted on the firewall. From the Y-block you’ll route the (2) -8an hoses with 90deg hose ends on them to the front of each rail. The shorter of the 2 hoses goes on the drivers side. The longer piece gets routed along the drivers side coil cover and across the front of the engine/supercharger along the coolant tubes. It’s then connected to the passenger side rail. Use zip ties to safely secure the fuel hose on the coolant line away from any other moving parts such as the supercharger pulley and belts. Lastly the longest piece of -8an hose runs from the bottom of the regulator (return port) to the fuel hat following the same hose routing as the feed line did. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Cobra Forums
The Terminator
Engine/Tuning
Help needed on lethal return system
Top