Help MAF Circuit Low Input W/JLT CAI

[Sheffism]

Installed my JLT CAI on my 2004 Cobra and now have Check Engine Soon Light. Code read MAF Circuit Input Low. Any suggestions? :shrug:

 

[mjchip]

Installed my JLT CAI on my 2004 Cobra and now have Check Engine Soon Light. Code read MAF Circuit Input Low. Any suggestions? :shrug:

Check that the connector is fully seated. Verify that you didn't slice through the insulation on one of the wires and that its touching the chassis. Verify that the element was not damaged.

MJ

 

[Sheffism]

All wires good. Plug seated and secure. Couls a possible air leak cause this? Am i hurting the car? Seems to run fine.

 

[Tucker]

Double check the vacuum line,IAT plug, MAF plug and connections around the MAF.
A air leak around the MAF will cause a stall or idle flux.
It sounds like somethings unpluged.
Dissconnect the battery for 20 min. or so and try again.
Let me know
Jay

 

[Sheffism]

Mjchip, Tuck, your the shizniz. The MAF harness wire was tight as Dick's hat band. I pulled it and the connector clicked and all is now good. Thanks for your help.

 

[mjchip]

Mjchip, Tuck, your the shizniz. The MAF harness wire was tight as Dick's hat band. I pulled it and the connector clicked and all is now good. Thanks for your help.

NP! Good luck with the car.

MJ

 

[Tucker]

Great!