Help identify this part - Lean Bank 1 & 2

tuscani66

Member
Established Member
Joined
Jan 27, 2014
Messages
55
Location
Woodstock, GA
I've been chasing the lean 1 and 2 for a while, a few times I thought I fixed it but only bought time; at a recent meet talking to a few guru's and he found what may be my issue almost immediately however throughout the talk I forgot to ask him what was the part name.

I took a couple pictures, took it to Ford service and they don't know what it was, talked to the 2 onstaff mechanics and they don't know either - reassuring I tell ya!

Anyhow, the part looks generic enough to where I can find it at my local car part store but need something to tell them.

Thanks in advance!
Keoni.
 

Attachments

  • 2014-09-27 17.23.51.jpg
    2014-09-27 17.23.51.jpg
    201.2 KB · Views: 97
  • 2014-09-27 17.24.04.jpg
    2014-09-27 17.24.04.jpg
    150.8 KB · Views: 91

tuscani66

Member
Established Member
Joined
Jan 27, 2014
Messages
55
Location
Woodstock, GA
I did not want to thread jack, but Mistichrome04 is doing a 3.4 upgrade and he had some photos comparing his old to new (LINKY).
 

Attachments

  • ImageUploadedByTapatalk1410926790.600987.jpg
    ImageUploadedByTapatalk1410926790.600987.jpg
    271.5 KB · Views: 95

Jefe

Well-Known Member
Established Member
Joined
Mar 24, 2006
Messages
18,443
Location
AZ
Boost bypass actuator if im not mistaken

What codes are you throwing?
 
Last edited:

tuscani66

Member
Established Member
Joined
Jan 27, 2014
Messages
55
Location
Woodstock, GA
Boost bypass actuator if im not mistaken

What codes are you throwing?

Thanks - afraid I might have to get the part from KB...

The codes I have are lean bank 2 then a little bit later will throw bank 1, usually only a few min apart pending on how I'm driving. If I ease it I can go 50 miles (I don't daily drive it, so maybe a couple days worth of driving) or it can come on a single drive.
 

Jefe

Well-Known Member
Established Member
Joined
Mar 24, 2006
Messages
18,443
Location
AZ
Do you have access to the manual? Post the actual codes and I can put up the procedures
 

Users who are viewing this thread



Top