HELP 160lb aqua top tuning

[GhostRiderblk]

So far I have got it to idle when Starting cold at about .95 lambda. When It gets hot and I shut it off or try to restart it won't fire anymore. I played with crank fuel and is duty. No apparent change. I am using sct adv 3 and live link for data log.


Mods using stock mach1 computer

Versafueler an 160lb ford aqua tops
9:5:1 compression bored .20
mmr stage r cams an polished heads
88mm turbo
stock intake mani and throttle body
magnafuel 650 base fuel pressure 40 psi
Running e85
th400 rmvb Trans
maf vmp5000 slot

 

[GhostRiderblk]

any help

could use any knowledge on this. ill even throw a few bucks. im about to throw the towel in

 

[jmstekguy]

crank pw during crank slowly take it down, and isc duty cycle during cranking. are the injectors scaled correctly? also changes in the voltage tables for the injectors will help

 

[rz5.0]

Not sure on sct but on BE there is a crank pulsewith vs ect and that needs to be modified

 

[badcobra]

IMO It's a losing battle trying to get 160lb injectors to work right. I finally gave up and bit the bullet for some ID1300's and tuned those and my HPX meter in a day.