Headlamp Wire Assey

[LizardGT500]

Hello,
My 2009 GT500 had been in a accident and I am rebuilding it now.
Having some issue with wiring as my fuse/relay box+PCM and wire harnesses are smashed
Dose any one have a wiring diagram for 2009 Shelby with HID?
I have managed to refbuild power and engine ones but having some problems with HeadLamp Wire Assey 8R3Z 14290-HAA.
The problem is that I cannot recognize 2 of 4 relays on a strut tower.
2 relays for headlights are still intact and I can trace the wires
#3 is most probably Intercooler pump, but wires messed up.
#4 is completely gone and unknown.
Anyone help, please.

 

[54First]

I'm not sure of your numbering scheme. The I/C pump relay is toward the front of the car closest to the fender and uses fuse #5. The missing one is the relay for fuel pump 2 and is toward the rear closest to the fender and uses fuse #6. They would be in a six fuse box on the front of the four relay box.

Steve

 

[LizardGT500]

Yeah I made a daft for myslef, just figure out what is what.
Thanks for the info Steve. At least now I know that the relay #4 is aux pump.
Now I need an info on the wires colors.
I do remember from the past researches, that IC pump was controled by PCM via purple/yellow wire by sending a positive through relay's coil to ground (black). The white/red wire remained attached to relay#3 and was traced to IC pump connector. taking into accoun the cross section of hot fused lines, blue is more likely to be a last wire for the IC pump.
That leaves me with 2 big pink wires that are the power lines for aux pump and 2 smaller blue/yellow and white which must be control lines for it.
Could any one confirm please if it's true or false?

IC relay:
purple/yellow, black - control
White/red, blue - controlled
Fuel pump:
blue/yellow, white - control
pinl, pink - controlled

Jack

 

[54First]

IC relay:
purple/yellow, black - control
White/red, blue - controlled
Fuel pump:
blue/yellow, white - control
pinl, pink - controlled

Jack

Allowing for age discoloration, you seem to have it right.
When new it went:
I/C Relay:
violet/white,dark blue/yellow - control
white/red,light blue - controlled
Fuel Pump Relay:
white,black - control
red,red/black - controlled (I'm assuming this is what you see as pink)

This is from a 2008, but I think they're the same.

Steve

 

[19COBRA93]

Just replace that whole harness. It's just over $100 and will save you hours of headaches.

 

[LizardGT500]

Thanks again Steve.

I like headaches, I wouldn't buy a Mustang if I wouldn't try to do things my self))

 

[19COBRA93]

Thanks again Steve.

I like headaches, I wouldn't buy a Mustang if I wouldn't try to do things my self))

So what are you going to do about all the broken plastic?

 

[LizardGT500]

Will hide those fuses and relays in harness.
I see your point about buying a new one but I am not in US, the Ford dealership asks around $300 for it. There's nothing on e-bay and I do not now any trustful online shop that would sell it and ship it abroad.

 

[LizardGT500]

Steve,
Could you please tell me the PNs of I/C and Aux pump relays? Cannot find 'em in Ford Microcat.

 

[54First]

The number on mine is 4F1T-14B192-AA but I think it's been superceded. Go here (Rock Auto) for a list of many Ford equivalent part numbers and several substitutes:

2009 FORD MUSTANG Universal Relay

If the link doesn't work, go to RockAuto Parts Catalog and look up Universal Relay for your car.

Steve

 

[Canadian Kona]

Hello,
My 2009 GT500 had been in a accident and I am rebuilding it now.
Having some issue with wiring as my fuse/relay box+PCM and wire harnesses are smashed
Dose any one have a wiring diagram for 2009 Shelby with HID?
I have managed to refbuild power and engine ones but having some problems with HeadLamp Wire Assey 8R3Z 14290-HAA.
The problem is that I cannot recognize 2 of 4 relays on a strut tower.
2 relays for headlights are still intact and I can trace the wires
#3 is most probably Intercooler pump, but wires messed up.
#4 is completely gone and unknown.
Anyone help, please.

I don't know if this helps.

 

[LizardGT500]

Thanks guys!

 

[LizardGT500]

And here is the last question on this harness.
All the connectors are recognised, except the one that is assumed to be located at the middle of the bumper (not a horn or I/C pump)
As the car is apart I cannot even imagine what it is. I suspect air con pressure sensor but not sure.
These are the only 2 wires in this harness that are twisted together and they do not go BEC connector, they are routed directly to PCM/SJB small connector. The colors are:
Violet/Green and Pink/Orange.

 

[54First]

Jack, might that be your radiator fan plug? If so, a LG-VT could be your low speed fan control, but your high speed would be LG-YE and I don't see that. Ground would be BK.
Just three wires. Can you give some more hints? (By the way, I'm color blind so I can't always tell the colors in the pictures)

Steve

 

[LizardGT500]

No no, this plug is not a fan plug. This connector on a picture is the main one, it connects the second part of the harness to PCM, it is located next to main fuse/relay box. I showed it just for the wire reference. These wires starts here and run aprox. to the middle of the harness to anothe connector that I am trying to distinguish.
If you follow the harness, this plug I am looking for, will be next one after horn/intercooler ones, but before the headlights. it is the only 2 wires twisted together in this harness.

 

[LizardGT500]

Solved.
It is wire for air bag sensor, that is located just behind the hood lock.

 

[54First]

Congratulations. I was still looking for it.

Steve