I bought this earlier this year and have since decided to go turbo instead. Blower was purchased from Roush via E-bay, said to be a case research piece, doesn't look like it was ever ran. I was told it is an early Harrop unit, therefore it has no EGR port machining on the back of the intake plenum area for the valve. Should work with any M122/Gen 1 TVS intake elbow (had a m122 elbow I verified fitment with prior to selling).
I have only set it on the intake manifold for mock up on my engine and never ran it. Blower has a seal on the intake port from when I received it and I haven't removed it to keep anything from getting in the rotors. Case has a scratch in one spot (pictured) and a few areas where in shipping and handling it has rubbed a little of the finish off (fine white specs in pictures). Rotors spin freely by hand, there is one spot I noticed a scratch/nick in the coating but it feels smooth and I don't for see it causing any issues. Looking for $1700 shipped
VMP 2.8" Cobra TVS pulley that has only been mocked up with 3 bolts hand tight to check belt alignment and figure out mounting location. $80 shipped
2013-2014 black Trinity elbow with VMP fitting installed. It was a christmas present bought with out checking blower model and subsequently doesn't fit a 1st Gen TVS housing. $100 shipped
All prices are gift or you pay the PP fees. I'm open to offers but not in a rush so please don't low ball me with ridiculously low offers.
I have only set it on the intake manifold for mock up on my engine and never ran it. Blower has a seal on the intake port from when I received it and I haven't removed it to keep anything from getting in the rotors. Case has a scratch in one spot (pictured) and a few areas where in shipping and handling it has rubbed a little of the finish off (fine white specs in pictures). Rotors spin freely by hand, there is one spot I noticed a scratch/nick in the coating but it feels smooth and I don't for see it causing any issues. Looking for $1700 shipped
VMP 2.8" Cobra TVS pulley that has only been mocked up with 3 bolts hand tight to check belt alignment and figure out mounting location. $80 shipped
2013-2014 black Trinity elbow with VMP fitting installed. It was a christmas present bought with out checking blower model and subsequently doesn't fit a 1st Gen TVS housing. $100 shipped
All prices are gift or you pay the PP fees. I'm open to offers but not in a rush so please don't low ball me with ridiculously low offers.
