H&R Race Springs Install Help

[vortech1120]

Hey guys, I am installing springs on the rear, I lowered the irs and replaced the springs and only used the botton stock isos.

When I jack the irs back up, it will not go up high enough to put the irs bolt back in, it seems like the springs are lifting the car when I'm jacking the irs back up into place.

Any help would be greatly appreciated, thanks guys.

 

[ripnesscobra]

You have to make sure that the IRS frame is aligned with the mounting ears for the upper mounting bolts. If the frame isn't perfectly aligned on both sides you will just jack the car up. Good luck.

 

[vortech1120]

You have to make sure that the IRS frame is aligned with the mounting ears for the upper mounting bolts. If the frame isn't perfectly aligned on both sides you will just jack the car up. Good luck.

Thanks I'll try re-aligning it.