Home
What's new
Latest activity
Authors
Store
Latest reviews
Search products
Forums
New posts
Search forums
What's new
New posts
New listings
New products
New profile posts
Latest activity
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
Cart
Cart
Loading…
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Search titles only
By:
Menu
Log in
Register
Navigation
Install the app
Install
More options
Change style
Contact us
Close Menu
Forums
Cobra Forums
The Terminator
How-To
H/E how-to. (with pics)
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Chris_H" data-source="post: 1962503" data-attributes="member: 13598"><p>Ok, we got the LFP H/E installed tonight and the Intercooler Resivour installed. The whole ordeal took about 2 hours for both. Here are the pictures and some instructions on how to do it. I hope this helps, sorry for the delay:</p><p></p><p>We took the front bumper off to make it easier to install and do the pictures. There are 10 total clips/nuts holding on the bumper. (4) 10mm nuts, (2) phillips head screws, and 4 retaining pins:</p><p></p><p>2 Retaining pins on the edge of the painted surface by the headlight:</p><p>[ATTACH=full]1271378[/ATTACH] </p><p></p><p>2 phillips head screws on the inner fenderwell, 1 per side:</p><p>[ATTACH=full]1271379[/ATTACH] </p><p></p><p>2 Retaining pins under the bumper, 1 per side:</p><p>[ATTACH=full]1271380[/ATTACH] </p><p></p><p>(2) 10mm bolts in the fender on each side where the bumper meets the fender:</p><p>[ATTACH=full]1271381[/ATTACH] </p><p></p><p>Disconnect the fog lights:</p><p>[ATTACH=full]1271382[/ATTACH] </p><p></p><p>Pull the bumper off by pulling the fender sides out so the bolts come out, then slide the bumper off by pulling it away from the car.</p><p></p><p></p><p>Disconnect the hose on the passenger side and let it drain:</p><p>[ATTACH=full]1271383[/ATTACH] </p><p></p><p>Unbolt the (4) 8mm bolts from the lower bracket, 2 under each side:</p><p>[ATTACH=full]1271384[/ATTACH] </p><p></p><p>Disconnect the drivers side hose. This is easy to do once you lower down the H/E (sorry no picture)</p><p></p><p>Remove the (4) 8mm bolts holding the brackets together, 2 each side:</p><p>[ATTACH=full]1271385[/ATTACH] </p><p></p><p>Remove the 10mm nut on the back of the passenger side bracket holding the hose bracket to the H/E bracket:</p><p>[ATTACH=full]1271386[/ATTACH] </p><p></p><p>Once you have the brackets off, you will need to bend them in order for the lager H/E to fit. Bend the bracket out away from the rubber bushing, and then bend the bracket about 1.5-2" down from the first bend, back in towards the center (parallel):</p><p>[ATTACH=full]1271387[/ATTACH] </p><p></p><p>Mount the brackets in reverse order of removal. Once the brackets are in place, slide the H/E up, connect the drivers side hose, and mount the H/E. It took both of us to get this up there and mounted. The kit came with (4) 8mm bolts and spacers. You need 3 spacers per bolt in order to get it to fit. You also need to add 1 spacer to the 10mm bolt that hold the hose bracket to the H/E bracket. This needs to go between the 2 brackets. Kind of a poor picture but you can see the silver between the brackets:</p><p>[ATTACH=full]1271388[/ATTACH] </p><p></p><p>[ATTACH=full]1271389[/ATTACH] </p><p></p><p>[ATTACH=full]1271390[/ATTACH] </p><p></p><p>Tighten all 4 of those bolts up, connect the passenger side hose. The hose bracket needed to be bent by the spacer in order for us to get the hose to connect to the H/E. Reinstall the bumper in reverse order of removal.</p><p></p><p>Comparison:</p><p>[ATTACH=full]1271391[/ATTACH] </p><p>[ATTACH=full]1271392[/ATTACH] </p><p>[ATTACH=full]1271393[/ATTACH] </p><p></p><p></p><p>If you guys have any questions, let me know. Hope this helps.</p><p></p><p>Chris</p></blockquote><p></p>
[QUOTE="Chris_H, post: 1962503, member: 13598"] Ok, we got the LFP H/E installed tonight and the Intercooler Resivour installed. The whole ordeal took about 2 hours for both. Here are the pictures and some instructions on how to do it. I hope this helps, sorry for the delay: We took the front bumper off to make it easier to install and do the pictures. There are 10 total clips/nuts holding on the bumper. (4) 10mm nuts, (2) phillips head screws, and 4 retaining pins: 2 Retaining pins on the edge of the painted surface by the headlight: [ATTACH=full]1271378[/ATTACH] 2 phillips head screws on the inner fenderwell, 1 per side: [ATTACH=full]1271379[/ATTACH] 2 Retaining pins under the bumper, 1 per side: [ATTACH=full]1271380[/ATTACH] (2) 10mm bolts in the fender on each side where the bumper meets the fender: [ATTACH=full]1271381[/ATTACH] Disconnect the fog lights: [ATTACH=full]1271382[/ATTACH] Pull the bumper off by pulling the fender sides out so the bolts come out, then slide the bumper off by pulling it away from the car. Disconnect the hose on the passenger side and let it drain: [ATTACH=full]1271383[/ATTACH] Unbolt the (4) 8mm bolts from the lower bracket, 2 under each side: [ATTACH=full]1271384[/ATTACH] Disconnect the drivers side hose. This is easy to do once you lower down the H/E (sorry no picture) Remove the (4) 8mm bolts holding the brackets together, 2 each side: [ATTACH=full]1271385[/ATTACH] Remove the 10mm nut on the back of the passenger side bracket holding the hose bracket to the H/E bracket: [ATTACH=full]1271386[/ATTACH] Once you have the brackets off, you will need to bend them in order for the lager H/E to fit. Bend the bracket out away from the rubber bushing, and then bend the bracket about 1.5-2" down from the first bend, back in towards the center (parallel): [ATTACH=full]1271387[/ATTACH] Mount the brackets in reverse order of removal. Once the brackets are in place, slide the H/E up, connect the drivers side hose, and mount the H/E. It took both of us to get this up there and mounted. The kit came with (4) 8mm bolts and spacers. You need 3 spacers per bolt in order to get it to fit. You also need to add 1 spacer to the 10mm bolt that hold the hose bracket to the H/E bracket. This needs to go between the 2 brackets. Kind of a poor picture but you can see the silver between the brackets: [ATTACH=full]1271388[/ATTACH] [ATTACH=full]1271389[/ATTACH] [ATTACH=full]1271390[/ATTACH] Tighten all 4 of those bolts up, connect the passenger side hose. The hose bracket needed to be bent by the spacer in order for us to get the hose to connect to the H/E. Reinstall the bumper in reverse order of removal. Comparison: [ATTACH=full]1271391[/ATTACH] [ATTACH=full]1271392[/ATTACH] [ATTACH=full]1271393[/ATTACH] If you guys have any questions, let me know. Hope this helps. Chris [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Cobra Forums
The Terminator
How-To
H/E how-to. (with pics)
Top