Guess the HP and TQ (Turbo Cobra getting tuned)

[My Cobra]

Well after a turbo build the car is off to the tuner this week. Guess the HP and TQ. Below are the mods (Let me know if i left anything out):

Hellion single set up with upgraded Precision turbo
Aeromotive A1000 with 80 pound injectors
Borla Stinger catback
Stock T56 with RXT clutch, Fidanza aluminium fly wheel, 26 spline set up
Stock 03 Cobra motor with 40k on the clock
Ported upper and lower 01 cobra intake
BA5000 Slot style maf
Car is located in Charlotte NC
SCT handheld but custom dyno tune.

Will be on pump gas (93) with less than 18 pounds of boost.

 

[Joyrider564]

705rwhp/715rwtq

 

[FiveOhJoe]

675hp 715tq

 

[TheBrinston]

600/650

 

[BlksvtCobra01]

700/710

 

[My Cobra]

thanks guys, Keep them coming. I was in hopes for 700.

 

[theunseenclass]

665/680

 

[HURTNEM]

My guess is it'll make the same HP/TQ as every other Cobra with this setup...

 

[stroked mach]

wow are you just mad or sad,, you want to talk about it??^^^,,,, hope it makes around 7xx if I had a cobra I would love to run a setup like yours

 

[HURTNEM]

^^^LOL, not mad or sad and there's nothing I want to talk about. That's my guess. If it doesn't make what the rest make something is wrong. If it makes more than the rest something extra must be added into the mix. Other than that, my guess is it'll make what every other Cobra makes with that setup. I wish the OP the best and a safe dyno tune.

 

[AntiHeightPunk]

Didn't know every cobra was tuned by the same person and every motor was the same

 

[stroked mach]

I think the cobra platform is the best for a turbo setup, I think the big blowers are nice and make killer power but, the turbo setup is the way togo for great power, but that my opinion ,to the op post up some pics of your setup I know its like everyother setup but would like to see it

 

[Juiced46]

LOL so please tell us what EVERY Cobra makes with these same mods......

What Precision Turbo are you running?

 

[87poopstang]

687/674

 

[My Cobra]

76mm billet wheel.

 

[cobra-k]

715/690

 

[MTBSully]

I just made 641/647 with a on3 FF kit, 76mm BB turbonetics kit and 16.5PSI. That was on the about the 14th pull too so everything was really hot. Going to go back in a few weeks with the stiffer wastegate springs in and maybe it will be a bit cooler and go from there.

 

[My Cobra]

I just made 641/647 with a on3 FF kit, 76mm BB turbonetics kit and 16.5PSI. That was on the about the 14th pull too so everything was really hot. Going to go back in a few weeks with the stiffer wastegate springs in and maybe it will be a bit cooler and go from there.

Nice! What kind of fuel set up do you have? Wastegate stop you at 16.5?

 

[MTBSully]

Nice! What kind of fuel set up do you have? Wastegate stop you at 16.5?

I had the 6lb springs in so my AEM tru boost was maxed out at around 16-16.5PSI. Going to go back with the 10lb springs. I have lethals return system with stock rails and feed, 80lb injectors, division X hat and dual 255lph walbros.

 

[My Cobra]

Nice set up!