I have a 2007 GT500 with a 2.8KB installed. Bought the vehicle this way many years back. Went to start the car the other day and all it would do is crank but not fire. A few moments later I started to smell gas. Looked under the hood and on the pasenger side bank I had fuel coming out of one of the injectors. So I figure I have a clogged/bad injector and that's why the car won't start.
I am okay with changing the injectors but the KB blower has the integrated elbow so I will need to remove the blower setup to get to the fuel rails so I can pull the injectors. Since I did not do the install I am not sure of the steps to remove the blower and what else needs to be removed in the process. Anyone have a "how-to" guide on this or can point me in the right direction?
Thanks!
GT
I am okay with changing the injectors but the KB blower has the integrated elbow so I will need to remove the blower setup to get to the fuel rails so I can pull the injectors. Since I did not do the install I am not sure of the steps to remove the blower and what else needs to be removed in the process. Anyone have a "how-to" guide on this or can point me in the right direction?
Thanks!
GT