COMPLETE DOB KIT
Ok, for those of you wanting the DOB supercharger setup but want or need a complete kit well, here ya go! If you purchase a supporting parts kit or partial kit I can offer a small discount when you are ready to purchase a new manifold. The manifold will come with everything from Department of Boost including the newly revised pan and 1 year manufacture warranty on the manifold.
ALL the parts listed below are the complete supporting parts kit (like blower, CAI fuel system etc.). The "kit" does not include the required Department of Boost manifold.. But I can sell you a new one of those too. This kit includes everything down to the last nut, bolt, wire and hose you will need to install your blower. I call this option the "Rookie" kit (no offense, just need to call it something to avoid confusion). I also include a itemized list of all the parts and they come numbered with a description of what they are.
I also included a "tuner" kit has items on this list marked "Deleted option 1". This is for the guy that has wire, connectors, hose, clamps, sealant and basic shop stuff laying around already.
Option 1 or "Rookie" kit
$2,100 For the ENTIRE supporting parts kit INCLUDING the items marked "Deleted"
Option 2 or "Tuner" kit
$1800 This does NOT include the items marked "Deleted" on the following list
Add a new manifold Additional $1949 Manifolds are only produced every couple months. Have yours NOW!
If you are Local to the Wichita KS area I will sell you ALL the parts, installation and custom tune for $5200 out the door!
Depending on which option you choose many mods will come completed for you. Ex: DOB pulley installed, hose cut to approximate length, tensioner mod, mods to blower and belt cut to 6-rib. This saves you some time and it will be correct.
This kit comes with the support to make 450 rwhp with a good tune. This is the max I would recommend on a stock motor. The Ford Racing kits sold by the dealer is super super expensive but that is the power level their kit makes. They warranty the motor and everything behind it at that power level using their kits and dealer install from what I am told. Again, your tune is critical and more important on high power applications. If you call me and let me know your mods then maybe I will provide you with the support to make more power. 550-600 rwhp on a properly tuned built motor is not hard to do on this kit. I will not sell the kit to support that power if you do not have the motor to do it.
Here is a list of the parts
1 Stock Blower (All mods included for installation on DOB manifold) Have a new takeoff 2012 and a couple excellent low miles 09-10 stock blowers.
2 Elbow (If you choose the ported option this will also come ported and port matched to the blower included in porting fee)
3 Bypass Valve
4 CAI (several to choose from: JLT 110 carbon fiber, Steeda 114, K&N and stock.)
5 GT500 60mm TB with electronics (No need to swap your GT electronics over. Ready to bolt on, also have New available).
6 GT500 Dual Fuel pumps w/harness/fdpm (less than 100 miles from a 2012 GT500 SS conversion. Sending unit has been swapped for compatability)
7 (8) 47lb FRPP GT500 injectors (Excellent condition 1,200 miles off a 2012 GT500)
8 1 step colder spark plugs (New In Box. I will need to know what year your car is to determine which plugs to send)
9 GT500 Heat Exchanger and brackets (Good condition with no leaks or bent fins etc. UPGRADE to LARGER 2012 with 1200 miles for additional fee.)
10 GT500 Heat Exchanger Pump (Used excellent low miles. Have new for a little more)
11 GT500 Degass bottle (Excellent)
12 GT500 Degass bottle cap (New In Box)
13 GT500 pigtail for HE pump (New In Box)
14 IAT Sensor (New In Box)
15 IAT Sensor Pigtail (New In Box)
16 GT500 SC to manifold gasket (New In Box)
17 Extra tensioner for Frankentensioner (New In Box. I will do the necessary modifications on this. Little left to complete frankentensioner)
18 2010 GT thermostat (New In Box)
19 Thermostat gasket (New In Box)
20 Belt (New In Box. They come 8-rib. I will trim the belt for the 6-rib standard DOB setup. If you have or are upgrading to 8-rib let me know)
21 Extra 76mm smooth idler (New In Box)
22 Longer tensioner bolts (3) M8x1.25x80mm (New In Box. Grade 10.5)
23 3/4 to -12AN manifold fittings (2) (New In Box)
24 90 -12AN barb fittings (2) (New In Box)
25 Doorman fuel line adapter (New In Box)
26 1/4" manifold fitting (New In Box)
27 1/2"manifold fitting (New In Box)
28 Supercharger oil (2) (New In Box)
29 Deleted option 1 Vacuum "T" fitting (New In Box)
30 Deleted option 1 Add-a-circuit for SJB (HE pump) (New In Box)
31 Deleted option 1 Relay for HE pump with relay pigtail (New In Box)
32 Deleted option 1 11/16 to 1 1/4Hose clamps (4) (New In Box)
33 Deleted option 1 3/8" Vacuum caps (2) (New In Box)
34 Deleted option 1 Heater core hose connector (New In Box)
35 Not in either kit Degass bottle 90 for routing to HE ... not required but nice. Optional but not required, not included in kit.
36 Deleted option 1 5/16 to 5/8 Hose clamps (5) (New In Box)
37 Deleted option 1 3/8 to 7/8 Hose clamps (4) (New In Box)
38 EGR blockoff plate Will fabricate. Not needed if you choose our ported blower. We weld the port shut when porting.
39 Nuts for Heatexchanger mount (4) (Used but you never see them anyway.. just nuts)
40 Alt extension but splice (New In Box. Should be plenty to cover REQUIRED wiring extensions.)
41 Alt extension battery lug (New In Box)
42 Alt extension 4 GA wire (New In Box)
43 Deleted option 1 Sealant for snout (New In Box)
44 Deleted option 1 Sealant for manifold fittings (New In Box)
45 Deleted option 1 Anti-seize for spark plugs (New In Box)
46 Deleted option 1 Assortment of Wire Ties (New In Box)
47 Deleted option 1 Electrical tape (New In Box)
48 Deleted option 1 Assortment of but splices, terminal connectors (New. Again, will be enough for the basic install)
49 Deleted option 1 Quick splices (New In Box. Option some may like to use if not a fan of wiring)
50 Deleted option 1 Heat shrink tubing (New In Box)
51 Deleted option 1 Wire for extensions (New In Box)
52 Deleted option 1 -12AN Heat exchanger hose to manifold (New. Cut to fit with some extra lenght. Will be labeled to location)
53 Deleted option 1 1" Hose from manifold to Degass bottle (New. Cut to fit with some extra lenght. Will be labeled to location)
54 Deleted option 1 1" hose from degass bottle to HE pump (New. Cut to fit with some extra lenght. Will be labeled to location)
55 Deleted option 1 -6AN Fuel rail crossover fuel line (New. Cut to fit with some extra lenght. Will be labeled to location)
56 Deleted option 1 -6AN Fuel rail to tank hard line fuel line (New. Cut to fit with some extra lenght. Will be labeled to location)
57 Deleted option 1 -6AN Brake boost OEM "T" to rear SC Vacuum (New. Cut to fit with some extra lenght. Will be labeled to location)
58 Deleted option 1 5/16" FRPS hose to manifold (New. Cut to fit with some extra lenght. Will be labeled to location)
59 Deleted option 1 5/8" PVC hose to pass side large Vacuum (New. Cut to fit with some extra lenght. Will be labeled to location)
60 Deleted option 1 5/16" Fresh air hose to CAI (New. Cut to fit with some extra lenght. Will be labeled to location)
61 Deleted option 1 -6AN Fuel line for EVAP to Elbow (New. Cut to fit with some extra lenght. Will be labeled to location)
62 M8x1.25x70mm tensioner pulley bolt (New In Box. Grade 10.5)
63 Deleted option 1 Heater core hose under manifold (New. Cut to fit with some extra lenght. Will be labeled to location)
64 Deleted option 1 Vacuum cap for unused part of brake boost "T" (New In Box)
65 Deleted option 1 -6AN Manifold "T" to Bypass valve hose (New In Box)
66 M6x1x20 Elbow bolts (New In Box)
Additional cost saving or upgrades
Let me know if you would like to further customize a parts kit. I may be able to leave certain things out, or upgrade/downgrade them at your request.
If you would like some seriously sweet porting you will get that for an additional $350, now only when buying my kit. Regular price is $450 and up.
This is a bit of work to put this kit together! If you have looked around you will know what a great deal this is, and how much time you will save in the process. Feel free to contact me for specific details.
[email protected]
This is what she looks like installed
Ok, for those of you wanting the DOB supercharger setup but want or need a complete kit well, here ya go! If you purchase a supporting parts kit or partial kit I can offer a small discount when you are ready to purchase a new manifold. The manifold will come with everything from Department of Boost including the newly revised pan and 1 year manufacture warranty on the manifold.
ALL the parts listed below are the complete supporting parts kit (like blower, CAI fuel system etc.). The "kit" does not include the required Department of Boost manifold.. But I can sell you a new one of those too. This kit includes everything down to the last nut, bolt, wire and hose you will need to install your blower. I call this option the "Rookie" kit (no offense, just need to call it something to avoid confusion). I also include a itemized list of all the parts and they come numbered with a description of what they are.
I also included a "tuner" kit has items on this list marked "Deleted option 1". This is for the guy that has wire, connectors, hose, clamps, sealant and basic shop stuff laying around already.
Option 1 or "Rookie" kit
$2,100 For the ENTIRE supporting parts kit INCLUDING the items marked "Deleted"
Option 2 or "Tuner" kit
$1800 This does NOT include the items marked "Deleted" on the following list
Add a new manifold Additional $1949 Manifolds are only produced every couple months. Have yours NOW!
If you are Local to the Wichita KS area I will sell you ALL the parts, installation and custom tune for $5200 out the door!
Depending on which option you choose many mods will come completed for you. Ex: DOB pulley installed, hose cut to approximate length, tensioner mod, mods to blower and belt cut to 6-rib. This saves you some time and it will be correct.
This kit comes with the support to make 450 rwhp with a good tune. This is the max I would recommend on a stock motor. The Ford Racing kits sold by the dealer is super super expensive but that is the power level their kit makes. They warranty the motor and everything behind it at that power level using their kits and dealer install from what I am told. Again, your tune is critical and more important on high power applications. If you call me and let me know your mods then maybe I will provide you with the support to make more power. 550-600 rwhp on a properly tuned built motor is not hard to do on this kit. I will not sell the kit to support that power if you do not have the motor to do it.
Here is a list of the parts
1 Stock Blower (All mods included for installation on DOB manifold) Have a new takeoff 2012 and a couple excellent low miles 09-10 stock blowers.
2 Elbow (If you choose the ported option this will also come ported and port matched to the blower included in porting fee)
3 Bypass Valve
4 CAI (several to choose from: JLT 110 carbon fiber, Steeda 114, K&N and stock.)
5 GT500 60mm TB with electronics (No need to swap your GT electronics over. Ready to bolt on, also have New available).
6 GT500 Dual Fuel pumps w/harness/fdpm (less than 100 miles from a 2012 GT500 SS conversion. Sending unit has been swapped for compatability)
7 (8) 47lb FRPP GT500 injectors (Excellent condition 1,200 miles off a 2012 GT500)
8 1 step colder spark plugs (New In Box. I will need to know what year your car is to determine which plugs to send)
9 GT500 Heat Exchanger and brackets (Good condition with no leaks or bent fins etc. UPGRADE to LARGER 2012 with 1200 miles for additional fee.)
10 GT500 Heat Exchanger Pump (Used excellent low miles. Have new for a little more)
11 GT500 Degass bottle (Excellent)
12 GT500 Degass bottle cap (New In Box)
13 GT500 pigtail for HE pump (New In Box)
14 IAT Sensor (New In Box)
15 IAT Sensor Pigtail (New In Box)
16 GT500 SC to manifold gasket (New In Box)
17 Extra tensioner for Frankentensioner (New In Box. I will do the necessary modifications on this. Little left to complete frankentensioner)
18 2010 GT thermostat (New In Box)
19 Thermostat gasket (New In Box)
20 Belt (New In Box. They come 8-rib. I will trim the belt for the 6-rib standard DOB setup. If you have or are upgrading to 8-rib let me know)
21 Extra 76mm smooth idler (New In Box)
22 Longer tensioner bolts (3) M8x1.25x80mm (New In Box. Grade 10.5)
23 3/4 to -12AN manifold fittings (2) (New In Box)
24 90 -12AN barb fittings (2) (New In Box)
25 Doorman fuel line adapter (New In Box)
26 1/4" manifold fitting (New In Box)
27 1/2"manifold fitting (New In Box)
28 Supercharger oil (2) (New In Box)
29 Deleted option 1 Vacuum "T" fitting (New In Box)
30 Deleted option 1 Add-a-circuit for SJB (HE pump) (New In Box)
31 Deleted option 1 Relay for HE pump with relay pigtail (New In Box)
32 Deleted option 1 11/16 to 1 1/4Hose clamps (4) (New In Box)
33 Deleted option 1 3/8" Vacuum caps (2) (New In Box)
34 Deleted option 1 Heater core hose connector (New In Box)
35 Not in either kit Degass bottle 90 for routing to HE ... not required but nice. Optional but not required, not included in kit.
36 Deleted option 1 5/16 to 5/8 Hose clamps (5) (New In Box)
37 Deleted option 1 3/8 to 7/8 Hose clamps (4) (New In Box)
38 EGR blockoff plate Will fabricate. Not needed if you choose our ported blower. We weld the port shut when porting.
39 Nuts for Heatexchanger mount (4) (Used but you never see them anyway.. just nuts)
40 Alt extension but splice (New In Box. Should be plenty to cover REQUIRED wiring extensions.)
41 Alt extension battery lug (New In Box)
42 Alt extension 4 GA wire (New In Box)
43 Deleted option 1 Sealant for snout (New In Box)
44 Deleted option 1 Sealant for manifold fittings (New In Box)
45 Deleted option 1 Anti-seize for spark plugs (New In Box)
46 Deleted option 1 Assortment of Wire Ties (New In Box)
47 Deleted option 1 Electrical tape (New In Box)
48 Deleted option 1 Assortment of but splices, terminal connectors (New. Again, will be enough for the basic install)
49 Deleted option 1 Quick splices (New In Box. Option some may like to use if not a fan of wiring)
50 Deleted option 1 Heat shrink tubing (New In Box)
51 Deleted option 1 Wire for extensions (New In Box)
52 Deleted option 1 -12AN Heat exchanger hose to manifold (New. Cut to fit with some extra lenght. Will be labeled to location)
53 Deleted option 1 1" Hose from manifold to Degass bottle (New. Cut to fit with some extra lenght. Will be labeled to location)
54 Deleted option 1 1" hose from degass bottle to HE pump (New. Cut to fit with some extra lenght. Will be labeled to location)
55 Deleted option 1 -6AN Fuel rail crossover fuel line (New. Cut to fit with some extra lenght. Will be labeled to location)
56 Deleted option 1 -6AN Fuel rail to tank hard line fuel line (New. Cut to fit with some extra lenght. Will be labeled to location)
57 Deleted option 1 -6AN Brake boost OEM "T" to rear SC Vacuum (New. Cut to fit with some extra lenght. Will be labeled to location)
58 Deleted option 1 5/16" FRPS hose to manifold (New. Cut to fit with some extra lenght. Will be labeled to location)
59 Deleted option 1 5/8" PVC hose to pass side large Vacuum (New. Cut to fit with some extra lenght. Will be labeled to location)
60 Deleted option 1 5/16" Fresh air hose to CAI (New. Cut to fit with some extra lenght. Will be labeled to location)
61 Deleted option 1 -6AN Fuel line for EVAP to Elbow (New. Cut to fit with some extra lenght. Will be labeled to location)
62 M8x1.25x70mm tensioner pulley bolt (New In Box. Grade 10.5)
63 Deleted option 1 Heater core hose under manifold (New. Cut to fit with some extra lenght. Will be labeled to location)
64 Deleted option 1 Vacuum cap for unused part of brake boost "T" (New In Box)
65 Deleted option 1 -6AN Manifold "T" to Bypass valve hose (New In Box)
66 M6x1x20 Elbow bolts (New In Box)
Additional cost saving or upgrades
Let me know if you would like to further customize a parts kit. I may be able to leave certain things out, or upgrade/downgrade them at your request.
If you would like some seriously sweet porting you will get that for an additional $350, now only when buying my kit. Regular price is $450 and up.
This is a bit of work to put this kit together! If you have looked around you will know what a great deal this is, and how much time you will save in the process. Feel free to contact me for specific details.
[email protected]
This is what she looks like installed
Last edited: