First up, a set of Gripper aluminum Caster camber plates. These are 3 bolt, with no bearing slop and when were removed recently were in great working condition.
Looking for sold
Second up, and coil over setup that was on the back of my car when I bought it. I am not sure of the brand or the spring rate, but they fit competition engineering low cost shocks and the springs rates are moderate. I was able to hook 600whp at the top of first, so they worked well. The sleeves have been cleaned up and move freely, and also added is a drilled and tapped set screw for a stop which is very convenient. Looking for SOLD
Looking for sold
Second up, and coil over setup that was on the back of my car when I bought it. I am not sure of the brand or the spring rate, but they fit competition engineering low cost shocks and the springs rates are moderate. I was able to hook 600whp at the top of first, so they worked well. The sleeves have been cleaned up and move freely, and also added is a drilled and tapped set screw for a stop which is very convenient. Looking for SOLD
Last edited: