I am considering selling my Eaton Swap to buy a Kenne Bell kit instead. The Eaton Swap is almost 100% complete, all it needs is the PS lines, Intercooler Pump pigtail, soft coolant hoses, and gaskets. I have EVERYTHING else, and i mean everything.
Let me know what you think and if you are interested, all feedback is greatly appreciated! DONT BE AFRAID TO THROW OUT AN OFFER
Specs:
Eaton and plenum from an 04 Cobra with 12K miles
upgraded 2.80 pulley
intercooler Lines and Elbows
Intercooler Fluid Resevoir
Heat Exchanger and mounting brackets
Intercooling pump and mounting bracket
Intercooler
Intercooler cap
Timing cover (New)
Every single Pulley
Supercharger pulley bridge
Belts (NEW)
Lower intake
IAC valve
04 fuel rails
Oil cooler/adapter from 03 Cobra
Stock 04 injectors
Alternator and both mounting brackets
Alternator wire pigtail
throttle and cc cables
throttle/cc bracket
Vacuum tree
PCV valve and hose
EGR valve and tube
Coolant Crossover
Boost Bypas valve
k and n fipk
I know im forgetting some things, Ill figure it out as i remember them...
:beer:
Let me know what you think and if you are interested, all feedback is greatly appreciated! DONT BE AFRAID TO THROW OUT AN OFFER
Specs:
Eaton and plenum from an 04 Cobra with 12K miles
upgraded 2.80 pulley
intercooler Lines and Elbows
Intercooler Fluid Resevoir
Heat Exchanger and mounting brackets
Intercooling pump and mounting bracket
Intercooler
Intercooler cap
Timing cover (New)
Every single Pulley
Supercharger pulley bridge
Belts (NEW)
Lower intake
IAC valve
04 fuel rails
Oil cooler/adapter from 03 Cobra
Stock 04 injectors
Alternator and both mounting brackets
Alternator wire pigtail
throttle and cc cables
throttle/cc bracket
Vacuum tree
PCV valve and hose
EGR valve and tube
Coolant Crossover
Boost Bypas valve
k and n fipk
I know im forgetting some things, Ill figure it out as i remember them...
:beer:
Last edited:
