Getting ready for the Whipple, What else is needed?

[shanesimps]

I have lately been purchasing the supporting mods for a whipple (17lbs of boost) and my 03 Cobra. Please let me know what else is needed or worthwhile to make the most of the whipple and over 600hp????

So far I have...

60Lbs Injectors
KB BAP
Billetflow Pullies & Reichard 3.2"
Gords Heat Exchanger
JLT CAI (Should I change to a RAI with 12" Filter??)
Accufaab T/B
SCT XCal2 Programer

I'm thinking Clutch, tune obviously. LDC Cooling Mod, Kooks headers and Cats.

Since you guys are the pros, please let me know what else I should do, I want to get it done in "One Shot!"

Thanks Guys!!

 

[2003 SVT ROUSH]

Your also going to need some sort of MAF , Im using the diablo MAFia
but i heart the SCT- BA2400 MAF is a tad better

And youll want to look into some new plugs im using NGK R series
i dont remember where i gapped them i have it written down somewhere

 

[2003 SVT ROUSH]

Oh and of course u'll have to dink around for the right belt, and just curious do you have any IRS supporting mods at all ?
To the least for now id jump on the Billit flor IRS Diff brace to have less chance on grenading ur Diff and look into some IRS Urithane bushings , Subframe connectors , that will greatly reduce wheel hop . your going to want things like this with 600 rwhp , and if ou can afford it Some LV 5 half shafts , i dont have em yet but im going for em

 

[shanesimps]

Yes, I am noting the SCT- BA2400 MAF for part of the package and the plugs. Thanks.

I had done most of the suspension mods already. MM kmember, a-arms, coilovers, bushings, full-length subframe connectors, caster cambers and some other MM stuff. It set me back a little and so its a struggle to gather all the supporting mods right now.

Anything for clutches?

 

[Quik Z06]

I have a Spec Stg 3 clutch and I like it, that would be enough of a clutch for 600 hp.

 

[Stevenbekah]

...and you'll need the 26 spline