I'm almost finished with this long process I've had of putting a ysi on my car. And I'm wondering what exactly does it take to get into the 8s?
Getting into the 8s
- Thread starter Bradleypro
- Start date
All the mods to support 1000rwhp, you'll need to plan on trapping 150+ to run <8.99s.
I should be right at 1k wheel. I'm running 6r80 with 5c convertor, only thing I'm missing suspension wise is anti roll bar and struts.
You'll definitely want an ARB.
What spring setup are you on? Share some more information on your combo
What spring setup are you on? Share some more information on your combo
5c especailly a dual disc will be alot of converter
Too much? It came with the swap I bought
Sleeved block, forged internals, oil pump gears, stock heads, comp cam stage 3 blower cams, pac springs as far as blower I'm running ysi with 8 rib kit. 20%od balancer 3 inch pulley on ysi. Boss mani ported.
Trans is 6r80 with clutchs, 5c convertor
Springs are sr, struts are stock for now, upr lower adjustable solids, upr upper adjustable solid, lca brackets, Sr panhard bar
Rear gear is 355
Depending on the weight you'll need 1000-1200hp.
It really just comes down to the combo. Just remember 90% of your ET comes from the first 330 feet. So make it work
It really just comes down to the combo. Just remember 90% of your ET comes from the first 330 feet. So make it work
Users who are viewing this thread
