fuse 14 after boosta pump install

[JOHNDIXON]

probably a simple problem, but i had my car in to be tuned today and had a boosta pump wired in before strapped down, ne ways when i got home and tried to restart had no fuel pressure, fuse 14 20 amp fuse blown! i can see that the fuse holder in the boosta pump wiring has a 30 amp fuse in it. were they supposed to change the #14 out and put a 30 there aswell. It'd make me pretty angry to find out they'd been making pulls on the dyno like that

 

[lowflyn]

Yes, that fuse should be changed out for a 30 amp.

 

[cobra=trouble]

probably a simple problem, but i had my car in to be tuned today and had a boosta pump wired in before strapped down, ne ways when i got home and tried to restart had no fuel pressure, fuse 14 20 amp fuse blown! i can see that the fuse holder in the boosta pump wiring has a 30 amp fuse in it. were they supposed to change the #14 out and put a 30 there aswell. It'd make me pretty angry to find out they'd been making pulls on the dyno like that

where's this #14 fuse at ? under the hood fuse box ?

 

[03Snake04]

yep!

 

[cobra=trouble]

yep!

does this need to be done if a dont have a BAP i got twin fpdms with the wire upgrade prof. install with the big fuse going in to the side of the eng fuse box.