I am in the process of updating my fuel system to support the power once the TT kit is installed in a few weeks. Here are the components currently in the car:
97 Cobra
Twin 61mm GT35R's
Stock intake
Ported Heads
Stage 1 blower specific cams (may change back to stock at some point)
Dynamic Racing C-4 Tranny with transbrake
Fuel system:
-8 lines from pump to rails
60 lb injectors (will upgrade to either 72lb or 83 lb injectors at some point)
-6 lines from rails to FPR
Weldon 2040 FPR
-6 line return to sumped tank
40 and 10 micron inline filters before and after the fuel pump
I recently sold my Weldon 2015 fuel pump to move onto something bigger that will support power in the 700-900 RWHP range. I would like to get away from having to go to a 2025 or 2345 Weldon pumps and having to use a voltage regulator to drive it on the street every once in a while and would love to move to a quieter continuous duty type pump. Now I want to get opinions on which one of these two choices to go to or what else you could suggest to reach my goal:
Twin Weldon 600A pumps rated at 60GPH @ 60 psi
or
Twin Bosch (044) pumps rated at 390 lph @ 42 psi
Both of those pumps are rated for continuous duty and do not have to be gravity fed all of which would make for a more driver friendly setup.
Opinions would be appreciated !!!
97 Cobra
Twin 61mm GT35R's
Stock intake
Ported Heads
Stage 1 blower specific cams (may change back to stock at some point)
Dynamic Racing C-4 Tranny with transbrake
Fuel system:
-8 lines from pump to rails
60 lb injectors (will upgrade to either 72lb or 83 lb injectors at some point)
-6 lines from rails to FPR
Weldon 2040 FPR
-6 line return to sumped tank
40 and 10 micron inline filters before and after the fuel pump
I recently sold my Weldon 2015 fuel pump to move onto something bigger that will support power in the 700-900 RWHP range. I would like to get away from having to go to a 2025 or 2345 Weldon pumps and having to use a voltage regulator to drive it on the street every once in a while and would love to move to a quieter continuous duty type pump. Now I want to get opinions on which one of these two choices to go to or what else you could suggest to reach my goal:
Twin Weldon 600A pumps rated at 60GPH @ 60 psi
or
Twin Bosch (044) pumps rated at 390 lph @ 42 psi
Both of those pumps are rated for continuous duty and do not have to be gravity fed all of which would make for a more driver friendly setup.
Opinions would be appreciated !!!