Fuel hat question?

[red92]

For those that are running (return style) the tripple walbro pumps, where did you put your return port for fuel to go back into the tank? I'm thinking right in front of the hat (towards the front of the car) have a -8 90deg bend welded or bolted to the tank? If anyone has any pics of this, I would greatly appreciate it.

:beer:

 

[red92]

So nobody has done this?????

 

[RoadRash]

I am running a Fore triple with a returnless setup. In researching return vs. returnless that I did before going with the triple returnless setup, I found the consensus was to weld in a return line. I believe Glenns Performance has a weld in return line for our tanks.

 

[red92]

Thanks, I appreciate it!

 

[Digital]

I am running a Fore triple with a returnless setup. In researching return vs. returnless that I did before going with the triple returnless setup, I found the consensus was to weld in a return line. I believe Glenns Performance has a weld in return line for our tanks.

+1, used same setup.