looking to trade the mach 1 for a low mileage, stock or modded terminator.
the mach has about 38k on the clock and is a 9 out of 10 on the exterior and just as nice on the inside. all mods have about 10k on them and then car needs nothing.
motor:
-stock shortblock
-P1sc on 6.5lbs.
-frpp ported heads :rockon:
-stage 2 comp cams
-ported intake
exhaust:
-bassani midlengths
-uncatted bassani x-pipe :rockon:
-bassani catback
fuel:
-42lb. injectors
-twin focus pumps
drivetrain:
-stock clutch and trans
-steeda base with a pro5.0 handle
-spool
-33-spline axles
-4.10s
suspension:
-h&r supersports
-10-way adjustable struts
-50/50 rear shocks
-adjustable lower control arms
-caster camber plates
brakes:
-drilled and slotted rotors up front
-hawk pads
-rears are stock
wheels are black cobras with a polished lip, 17x9 and 17x10.5. fronts have bfgs and rear have sumitomos. the car has been to the track a few times and traps around 127mph or so and is a blast to drive. its was tuned by Kurgan when they were still in chicago. it was detuned to the safe number of 494whp and 430ft/lbs. last summer we had it on Brenspeeds dyno and it made the same power. with a stronger motor it is easily a 600whp setup. i have a few pics and videos below. the car is located in lafayette, indiana and im willing to help deliver if need be. pm me with what you have, im on here almost everyday so feel free to ask questions/comment! thanks SVTP!
flyby video...
[nomedia="http://www.youtube.com/watch?v=lvreXXI5zso"]Procharged Mach 1 flyby - YouTube[/nomedia]
the mach has about 38k on the clock and is a 9 out of 10 on the exterior and just as nice on the inside. all mods have about 10k on them and then car needs nothing.
motor:
-stock shortblock
-P1sc on 6.5lbs.
-frpp ported heads :rockon:
-stage 2 comp cams
-ported intake
exhaust:
-bassani midlengths
-uncatted bassani x-pipe :rockon:
-bassani catback
fuel:
-42lb. injectors
-twin focus pumps
drivetrain:
-stock clutch and trans
-steeda base with a pro5.0 handle
-spool
-33-spline axles
-4.10s
suspension:
-h&r supersports
-10-way adjustable struts
-50/50 rear shocks
-adjustable lower control arms
-caster camber plates
brakes:
-drilled and slotted rotors up front
-hawk pads
-rears are stock
wheels are black cobras with a polished lip, 17x9 and 17x10.5. fronts have bfgs and rear have sumitomos. the car has been to the track a few times and traps around 127mph or so and is a blast to drive. its was tuned by Kurgan when they were still in chicago. it was detuned to the safe number of 494whp and 430ft/lbs. last summer we had it on Brenspeeds dyno and it made the same power. with a stronger motor it is easily a 600whp setup. i have a few pics and videos below. the car is located in lafayette, indiana and im willing to help deliver if need be. pm me with what you have, im on here almost everyday so feel free to ask questions/comment! thanks SVTP!
flyby video...
[nomedia="http://www.youtube.com/watch?v=lvreXXI5zso"]Procharged Mach 1 flyby - YouTube[/nomedia]
