FS: Spec 3+ clutch/Alum flywheel

[Oxford Snake]

Barely broken in with about 1000 miles on it.

Spec 3+ 26 spline clutch disk, pressure plate and aluminum flywheel. SOLD

*NOTE* One of the threads in the flywheel where the pressure plate attaches pulled out. Per Danny at Spec tech support (205) 491 8581 a Helicoil could be used to repair the threads.

 

[Oxford Snake]

bump

 

[saleen09]

Can vouch for seller.

Great guy to deal with and takes care of his stuff.

 

[Oxford Snake]

Bump with a lower price.

 

[Oxford Snake]

Ttt

 

[Oxford Snake]

bump

 

[Oxford Snake]

ttt

 

[Oxford Snake]

From: Matt Rocksvold [mailto:[email protected]]
Sent: Wednesday, June 25, 2008 10:16 AM
To:
Subject: bolt threads

Sure. You can Heli-coil™ the hole. Make sure you don’t over-tighten any of the bolts though. That is 6061 T6 aluminum, which is strong, but double check your source on the torque values. I believe it is supposed to be about 36-38 ft. lbs That should be for a 10mm bolt. Double check everything!

Regards,

Matt
Mechanical Engineer
SPEC, Inc.
(800) 828-4379

 

[Oxford Snake]

Bump.

 

[Hmbre97]

Is that a Spec flywheel?

 

[Oxford Snake]

Is that a Spec flywheel?

Yes, Spec aluminum flywheel.

 

[Oxford Snake]

Lowered to $425.

 

[Oxford Snake]

Still for sale.

 

[Oxford Snake]

Bump

 

[omj]

How much for just the flywheel?

 

[Oxford Snake]

How much for just the flywheel?

I would like to sell this as a complete package, thanks.

 

[djtyau]

If you are willing to split, I might be interested in the PP and clutch plate if the price is right.