FS: Pan Hard bar and Torque Arm

[slvr35th]

I have for sale a maximum motor sports pan hard bar and torque arm setup. this is a heavy duty arm. The Pan hard bar is for a 99-04 car. i also have a adustable rear sway bar setup, 87/8 bar with .188 thickness. I have a used set of full length sub frames i will through in with the torque arm for another $50.


Pan hard bar $320
http://www.maximummotorsports.com/Panhard-Bar-1999-04-solid-axle-equipped-Mustang-P482.aspx
Torque arm $600
http://www.maximummotorsports.com/MM-Torque-arm-1979-04-Mustang-88-axle-Heavy-Duty-P222.aspx
Sway bar $300
http://www.maximummotorsports.com/Adjustable-Rear-Swaybar-weld-in-kit-choose-bar-size-P545.aspx
Full Length sub frame $75
http://www.maximummotorsports.com/MM-Full-Length-Subframe-Connectors-1979-04-bare-P580.aspx


I dont have pics at this time, everything is still on the car. I will take $1000 shipped for everything

 

[SnakeBitten07]

Pics of the subframe connectors?

 

[slvr35th]

They are still on the car, they will have some weld on them im sure.

 

[Wallace7666]

Curious why youre selling?

 

[slvr35th]

When I first built the car, it was more of a street car. Now it more of a track car and the stuff isnt rated enough for the new motor I'm building. I loved the way this thing handle and hooked with this stuff it's just not going to work on the new setup

 

[Wallace7666]

This may be a dumb question, but do you need the MM subframes to use this torque arm setup? I have a different brand but I'm unsure of what they are.

 

[slvr35th]

No, but it is suggested to have full length connectors. You will need to buy the correct tabs for your subframe a from maximum though.

 

[SnakeBitten07]

Any idea why there's a difference between 94-98 and 99-04 cars for the Panhard bar?

 

[toxzzic1]

How much for panhard bar and torque arm? Is this for a cobra or gt?

 

[slvr35th]

Any idea why there's a difference between 94-98 and 99-04 cars for the Panhard bar?

Pretty sure it's the bolt size for the one bracket. The 94-98 have smaller bolts then 99-04

 

[slvr35th]

How much for panhard bar and torque arm? Is this for a cobra or gt?

These are for any 79-04 with sra.

http://www.maximummotorsports.com/Assets/install/pdf/rear_susp/MMTA3-4r2.pdf

 

[egore79]

Still have it?

 

[slvr35th]

Still have it?

Yes, have a standard and heavy duty torque arm still.

 

[slvr35th]

bump, everything off car with pics, also have torque arm springs included.

 

[jk_aktion]

bump, everything off car with pics, also have torque arm springs included.

Any pics uploaded yet?

 

[slvr35th]

Text me 9186259502 for pics

 

[XXWildCoyoteXX]

Bit of a older post but didn't see if you sold everything yet. Was wondering If you had the panhard bar and FL subframe connectors still?

 

[slvr35th]

Sorry everything is sold