FS: Hellion Twin turbo kit

[nightwing]

I have Brand new Hellion pipping kit that i purchased back in February for my 04 cobra. I think i have changed my mind and decided to go back to a S/C.
The only thing you will need is two turbos, waste gates, and a bov to complete the kit.

the kit is brand new still in the boxes.

Optional items
I have a mach 1 intake powercoated black

Other parts :
mach 1 intake
FRPP 80# injectors
mach 1 alternator ( recently rebuilt)
mach 1 crank pulley
UPR K-member kit ( two sets of coil springs)
Greddy EBC
this how i have it priced right now :
Prices
Hellion kit $4000.00
hellion kit with optional items except for the k-member $4500.00
hellion kit with everything include k-Member 4800.00
if paying with Paypal add 3% to cover fees. prices do not include shipping charges


Might do some partial trading towards the parts i need to get my cobra back stock .

 

[nightwing]

bump

 

[TwinTurbo4vGT]

kit in the engine bay or the bumper?

 

[nightwing]

bumper here is a sample pic

 

[TwinTurbo4vGT]

too bad. looking to change mine over to the engine bay.

 

[nightwing]

bump...

 

[nightwing]

Bump.. willing to listen to reasonable offers

 

[vettez062002]

anymore pics? what kinda of turbos? part numbers?

 

[nightwing]

this is a piping kit from hellion it comes with the following :
STP Oil Filter
MAF Adapter Flange (Aluminum)
Oil Pump
Oil Catch can
(5) 3.5 in T-bolt clamps
(2) 4.5 in T-bolt clamp
(1) 4.75 in T-bolt clamp
(6) 2.88 in T-bolt clamps
(2) 3 in V-band clamps
(8) 3 in Torq Clamps
(2) 4 in Worm hose clamps
(3) ½ in Worm hose clamps
(9) ¾ in Worm hose clamps
(2) 65-89 mm Worm hose clamps
(8) 3/8 x 1 ½ in long bolts (turbo)
(8) 3/8 in flanged nuts (turbo)
(2) 5/16 x ½ in long hex head bolts
(6) 5/16” nuts
(8) 5/16” Metal lock Nuts
(2) 5/16” Nylock Nuts
(4) 10/24 x ¾ in button head bolts
(4) 10/24 in NyLock nuts
(4) 10/24 in washers
(6) 5/16 x ¾ bolts for Turbo support bracket
(4) 1 ½ in long 5/16 studs
(6) 5/16” x 1” long bolts
(18) 5/16 AN Washers for Wastegate
(2) 1 ¼ long 5/16 Hex head bolts for turbo strap
(2) ¼ in thick Aluminum spacers for turbo strap
(1) 3” x 4” long silicone hose
(2) 3” to 4” adapter hoses
(1) 2.5” x 9” long silicone hose
(1) 3” to Oval silicone hose
(2) 2.5” x 3” long silicone hose
(1) 36” 3/8 Breather hose
(1) Relay
(1) Fuse Insert
(2) Wire Eyelet for 14 gauge wire
(1) Shrink wrap for 14 gauge wire
(1) 5 ft. 22 gauge wire
(1) 8 ft Wire Sheathing
(1) __ ft. red wire for pump
(1) __ ft. black wire for pump
(1) Inline fuse holder
(2) 20 amp fuse
(1) Solder
(1) Heat wrap roll
(6) Metal zip ties
(1) ½” pipe to # 12 90 degree fitting
(1) ½” pipe to #12 45 degree fitting
(2) ½” pipe to #10 45 degree fitting
(1) 3/8” pipe to ½” hose barb 90 degree
(2) #10 Push lock hose ends
(2) #12 Push lock hose ends
(1) #6 90 degree push lock hose ends
(1) #6 straight push lock hose end
(1) 3/8” - #6 adapter fitting
(1) 3/8” pipe female to #6 AN male fitting
(1) 3/8” pipe female to #6 AN female swivel
(1) 1 ft. #10 push lock hose
40” #12 push lock hose
(1) 9” #6 push lock hose
(1) 26” ½ “ oil hose
(1) ½” oil line splice
(1) 10” long ¾” water hose
(1) 16” long ¾” water hose
48” long ¾” water hose
(4) ¾” water hose splices
(2) 1/8” pipe to #4 90 degree
(1) ¼” pipe female to ¼” pipe male 90 degree
(1) ¼” pipe female, ¼” pipe female, ¼” male tee
(1) ¼” pipe male to #4 90 degree
(1) ¼” pipe male to #4 45 degree
(1) Vacuum tee 7/32”
(1) 5ft. 7/32” vacuum line
(2) Oil drain flanges
(1) 3/8” pipe tap
(1) oil pan punch
(10 zip ties
(1) 1/8” pipe to 7/32” barb adapter
(1) 47” oil line
(1) 57” oil line
(1) Drivers side turbo strap support bracket
(1) Passenger side turbo strap support bracket
(1) Oil pump /water pump bracket
(1) Intercooler support strap
Turbo Support Strap Driver kit
Turbo Support Strap Passenger kit.
(2) Heat shields
HTT-1 Drivers side Turbo inlet
HTT-2 Pass. Side Turbo inlet
HTT-3 Drivers side Downpipe
HTT-4 Pass. side Downpipe
HTT-5 Throttle Body Inlet (Supercharged)
HTT-6 Intercooler Pipe 1
HTT-7 Intercooler Pipe 2
HTT-8 X-Pipe inlet Driver
HTT-9 X-Pipe Inlet Pass.
HTT-10 X-Pipe Assembly
HTT-11 (2 pieces) 4” Turbo Inlet Pipes
Self Tapping Screw
Stainless Safety wire

Other parts :
mach 1 intake
FRPP 80# injectors
mach 1 alternator ( recently rebuilt)
mach 1 crank pulley
UPR K-member kit ( two sets of coil springs)
Greddy EBC

all you will need to buy are the turbos of your choice , wastegates ,and BOV.

 

[vettez062002]

pics?

 

[nightwing]

everything is still, i dont not want to pull all those parts of the boxes . i will open the tops this weekend and take pics of the contents, but i'm not pulling them out of the box.

 

[nast97]

How much for the injectors?

 

[nightwing]

Not separating anything til Turbo kit sells...

 

[nightwing]

here are some pics .. you cant see much as they are still in the box..
box of piping

Exhaust clamps

Intercooler, oil pump etc are in this box

 

[96lowbra]

u said u wanted to go S/C What about trading plus cash I got a Whipple?

 

[nightwing]

pm me if your serious and lets see what we can work out ..

 

[96lowbra]

Pm you

 

[2001Snake]

Bump from a guy that wishes he had this!

 

[nightwing]

Wastegates ordered... once I order turbos I'm keeping it

 

[nightwing]

bump...