This is a take off of my 03 turbo car.
Parts included-
-Glenns Performance Sleeper Tank - 10an feed - 8an return
- 10an feed line and 8an return line.
-Dual Walbro GSL 392 pumps with 2 Billet Y blocks at rear to run pumps in parallel and another Y block at the firewall to split the feed for the fuel rails.
-Aeromotive Fuel Filter
-Aeromotive boost referencing fuel regulator. 1:1
- Fuel Rails with necessary feed lines
-All an fittings
This system supported over 780RWHP through a Lentech automatic with zero issues.
I'm asking $1400 or near offer for this setup.
I also have 80lb injectors that have been cleaned and flow matched by RC Engineering. -$300 or near offer.
Parts included-
-Glenns Performance Sleeper Tank - 10an feed - 8an return
- 10an feed line and 8an return line.
-Dual Walbro GSL 392 pumps with 2 Billet Y blocks at rear to run pumps in parallel and another Y block at the firewall to split the feed for the fuel rails.
-Aeromotive Fuel Filter
-Aeromotive boost referencing fuel regulator. 1:1
- Fuel Rails with necessary feed lines
-All an fittings
This system supported over 780RWHP through a Lentech automatic with zero issues.
I'm asking $1400 or near offer for this setup.
I also have 80lb injectors that have been cleaned and flow matched by RC Engineering. -$300 or near offer.
Last edited: