I have for sale a used 4v Hellion Single Turbo kit. This kit was on an 03 Cobra. Fits 03-04 Cobras, 03-04 Mach 1s, 99-01 Cobras. Will also work with 99+ 2V GT with some slight changes. This setup with the upgrades on a stock 03-04 Cobra motor is capable of over 900-1000rwhp
This is not your basic Hellion kit. There have been many upgrades/improvements done on this kit from the standard Hellion single kit. Included is a Billet Precision 76mm Turbo (upgraded from the Turbonetics 76mm you get with the kit) It has been converted to a Blow through MAF setup. Upgraded Tial 50mm Blow Off valve (upgraded from the Turbosmart BOV). Upgraded Turbosmart 38mm wastegate. Upgraded 4" downpipe (used to be a 3") with a custom 3" catback. Upgraded 3" intercooler piping from intercooler to intake.
This is what you get. Suspension is not included, you will need a UPR K member, coil overs and CC plates
-Hellion Turbo kit
-Billet Precision 76mm Turbo .96 A/R
-All needed piping, clamps etc.
-Upgraded 3" piping converted to blow through from intercooler to Throttle body
-PMAS HPX slot MAF sensor
-Tial 50mm BOV
-Turbosmart 38mm Wastegate with dump tube
-4" Custom downpipe
-Custom Borla 3" catback. This catback is made to fit this downpipe. Also this catback will ONLY fit a solid axle mustang. If you have an IRS you will need to modify your catback to work with the downpipe which is a pretty simple fix. If you do not want the catback at all I will reduce the price. The DP will still work, just need to make a Y off the catback with a 4" VBand flange to connect to the DP
-Hellion Standard Intercooler
-Oil lines, drain lines, fittings, coolant hoses clamps etc.
-01 Cobra upper and lower intake (with MAP sensor mounted in intake lid, sensor included)
-BBK 62mm twin blade throttle body
-01 Cobra Alternator and bracket
-Throttle cable
-Belt
This is basically everything you need to get you up and going aside from a tune and the suspension.
Fuel rails and injectors in picture are not included, but can be for an additional cost.
Asking $6000 obo for everything. Sorry I am not interested in trades. Also I will not ship this. I am located in Wallingford CT. The items would need to be picked up at my shop. The downpipe and catback is way to long to ship. Also if needed I can do the installation @ my shop for the buyer.
Please PM me here, email me @ [email protected] or Text/call 203-887-7907
Dave
See pics below.
Kit installed on car
This is not your basic Hellion kit. There have been many upgrades/improvements done on this kit from the standard Hellion single kit. Included is a Billet Precision 76mm Turbo (upgraded from the Turbonetics 76mm you get with the kit) It has been converted to a Blow through MAF setup. Upgraded Tial 50mm Blow Off valve (upgraded from the Turbosmart BOV). Upgraded Turbosmart 38mm wastegate. Upgraded 4" downpipe (used to be a 3") with a custom 3" catback. Upgraded 3" intercooler piping from intercooler to intake.
This is what you get. Suspension is not included, you will need a UPR K member, coil overs and CC plates
-Hellion Turbo kit
-Billet Precision 76mm Turbo .96 A/R
-All needed piping, clamps etc.
-Upgraded 3" piping converted to blow through from intercooler to Throttle body
-PMAS HPX slot MAF sensor
-Tial 50mm BOV
-Turbosmart 38mm Wastegate with dump tube
-4" Custom downpipe
-Custom Borla 3" catback. This catback is made to fit this downpipe. Also this catback will ONLY fit a solid axle mustang. If you have an IRS you will need to modify your catback to work with the downpipe which is a pretty simple fix. If you do not want the catback at all I will reduce the price. The DP will still work, just need to make a Y off the catback with a 4" VBand flange to connect to the DP
-Hellion Standard Intercooler
-Oil lines, drain lines, fittings, coolant hoses clamps etc.
-01 Cobra upper and lower intake (with MAP sensor mounted in intake lid, sensor included)
-BBK 62mm twin blade throttle body
-01 Cobra Alternator and bracket
-Throttle cable
-Belt
This is basically everything you need to get you up and going aside from a tune and the suspension.
Fuel rails and injectors in picture are not included, but can be for an additional cost.
Asking $6000 obo for everything. Sorry I am not interested in trades. Also I will not ship this. I am located in Wallingford CT. The items would need to be picked up at my shop. The downpipe and catback is way to long to ship. Also if needed I can do the installation @ my shop for the buyer.
Please PM me here, email me @ [email protected] or Text/call 203-887-7907
Dave
See pics below.
Kit installed on car
Last edited: