I am converting my 2002 GT SRA 8.8 rearend to a Full Floater setup from Baer Brakes. Its currently loaded with Strange Engineering 33-spline upgraded parts and C-clip Eliminator Kit. All the parts have about 1500 miles total street and dyno time. My car has also been on jack stands since winter 2011 so it has not been driven.
**NOTE - These parts will drop in a 99-04 length SRA 8.8. For use in a shorter 8.8, you have to send the axles back to Strange for them to shorten to length.
- Strange N1867 33-spline Pro Clutch Posi Differential - $689.00
- Strange A1096 C-clip Eliminator Kit for factory Ford 8.8 (SN-95/New Edge) housing ends, factory style brake caliper mounts, and still maintain ABS - $229.90
- Strange A1094E ABS Reluctor Rings for use with above A1096 C-clip Elim Kit - $34.50/ea x 2
- Strange A1000 Pro Race (Hy-Tuff) 33-spline Axles tapped for 1/2" x 20 screw-in studs - $410.30
- ARP 100-7704 1/2" x 20 Screw-in Extended Wheel Studs for use with above A1000 Axles - $13.60
That's over $1400 in parts not including shipping.
I will sell for $1100 plus Paypal fees and I'll even split the shipping to the lower 48.
I will order and replace maintenance parts i.e. seals, gaskets and o-rings (1 ea per side) prior to shipping so there is nothing to order on your end.
The parts are still in the rear until I have a buyer. I listed the part numbers so you can see what they look like.
Thanks,
Franz
520-289-3500
**NOTE - These parts will drop in a 99-04 length SRA 8.8. For use in a shorter 8.8, you have to send the axles back to Strange for them to shorten to length.
- Strange N1867 33-spline Pro Clutch Posi Differential - $689.00
- Strange A1096 C-clip Eliminator Kit for factory Ford 8.8 (SN-95/New Edge) housing ends, factory style brake caliper mounts, and still maintain ABS - $229.90
- Strange A1094E ABS Reluctor Rings for use with above A1096 C-clip Elim Kit - $34.50/ea x 2
- Strange A1000 Pro Race (Hy-Tuff) 33-spline Axles tapped for 1/2" x 20 screw-in studs - $410.30
- ARP 100-7704 1/2" x 20 Screw-in Extended Wheel Studs for use with above A1000 Axles - $13.60
That's over $1400 in parts not including shipping.
I will sell for $1100 plus Paypal fees and I'll even split the shipping to the lower 48.
I will order and replace maintenance parts i.e. seals, gaskets and o-rings (1 ea per side) prior to shipping so there is nothing to order on your end.
The parts are still in the rear until I have a buyer. I listed the part numbers so you can see what they look like.
Thanks,
Franz
520-289-3500
