FS: Baseline Suspensions Lower Control Arms and Pro-Launch Track Locator SRA

[9cobrastang7]

I have for sale the Baseline Suspensions Lower Control Arms and Pro-Launch Track Locator. They were on my car for around 200 miles. There is nothing wrong with them, just decided to go another route with my rear setup. These lower control arms go no have the swaybar connections on them and will require an anti-roll bar.
Descriptions below:

LCA #1 Lower Control Arms:
Direct Bolt-In with Solid bushings on both ends.
TIG welded Chromemoly
Single Adjustable
5/8" x 1/2" Chromemoly Heim ends
Standard with 1/2" control arm bolts
With Spring perches
Does not use swaybar.

Pro-Launch Track Locator
If you already have a Prolaunch #1 OR #2 upper control arm kit then this is what you need.
Center the rearend under your car the EASY WAY!
Increase launch and top end stabilty!
Specify control arm bolt size when ordering: 1/2" bolts or 5/8" bolts
*Fits all exhaust systems.
*Bolt-in. No welding necessary.
**This part ONLY works with the Prolaunch #1 and #2 Upper Control Arm kits. Not recommended for use with Street Launch kit.

Further information can be found on http://www.baselinesuspensions.com/kits/ford.htm

Together I'm looking for $180. Individually I'm looking for $130 for the LCAs and $50 for the Pro-Launch Track Locator. All prices include shipping.

All directions will be included in the sale.

 

[9cobrastang7]

Bump it

 

[9cobrastang7]

bump

 

[SonicTerminator]

bump for a good product...i know a guy locally who has baseline on his mach, and that bitch hooks!