It is with great regret that I am selling my S/C Kit. I don't have the time for tinkering anymore and am putting my motor back to stock. Previous owner put 10k miles on it, and I put about another 8k. I am trying to sell as a kit, I do not want to part it out as of now.
The Idler Pulley failed on me and gouged the main bracket. So the bracket and idler pulley are NOT INCLUDED . Luckily, superchargers online sells both as a kit, new for $299. I have reduced my asking price by that much. Don't low ball me, I have way over 3k in this and shipping is going to be a killer. This is a great kit since I have done all the leg work for you, bolt this on, tune, and go. Made a conservative 402/348 @ about 7/8 PSI. Capable of WAY more with a more aggressive tune and/or a smaller pulley, I was just trying to baby my stock bottom end and tranny. Blower spins freely, no shaft play or funny business. Intercooler fits between bumper support, no need to cut it. Hard to find a kit this complete, use your tax refund wisely and BUY THIS!
I just pullled this yesterday and have not had time to clean it up. I will have this ship ready in a few days. With exception of the blower, intercooler and injectors, everything was purchased brand new by me.
Asking $2650 Shipped + PayPal fees
Included
- Vortech V1 S-trim Approx 18K MIles
- Procharger 3 core intercooler
- Vortech 3.40 Pulley installed, will include 3.60 as well.
- SN95 Cobra Vortech Discharge Pipe, tapped for IAC and Screw in IAT sensor
- CX racing intercooler piping kit with additional couplers and pipes added
- Vortech maxflow blow off valve with K&N filter Attached
- 3" Blow off Valve Pipe/Flange
- Coolant Crossover Tube
- 8 Ford Racing 39lbs EV6 injectors
- 8 EV6 Adapters
- Anderson Power pipe with matching blue coupler installed
- K&N Filter
- SCT BA5000 Blow Though MAF
- 3" aluminum MAF housing
- Brand New never installed Napa Belt
- Screw in Motorcraft IAT sensor installed in discharge pipe.
Here is what you'll need to make this work on a 96-98 Cobra
- New Main bracket/idler/Mounting bolt Kit from superchargers online $299
http://www.superchargersonline.com/...nfo&cPath=510_1218_1219_1555&products_id=5353
- Tune
- Fuel Pump 255 or higher
- Spark Plugs
- Dremel to widen air intake fender hole for inter cooler piping.
The Idler Pulley failed on me and gouged the main bracket. So the bracket and idler pulley are NOT INCLUDED . Luckily, superchargers online sells both as a kit, new for $299. I have reduced my asking price by that much. Don't low ball me, I have way over 3k in this and shipping is going to be a killer. This is a great kit since I have done all the leg work for you, bolt this on, tune, and go. Made a conservative 402/348 @ about 7/8 PSI. Capable of WAY more with a more aggressive tune and/or a smaller pulley, I was just trying to baby my stock bottom end and tranny. Blower spins freely, no shaft play or funny business. Intercooler fits between bumper support, no need to cut it. Hard to find a kit this complete, use your tax refund wisely and BUY THIS!
I just pullled this yesterday and have not had time to clean it up. I will have this ship ready in a few days. With exception of the blower, intercooler and injectors, everything was purchased brand new by me.
Asking $2650 Shipped + PayPal fees
Included
- Vortech V1 S-trim Approx 18K MIles
- Procharger 3 core intercooler
- Vortech 3.40 Pulley installed, will include 3.60 as well.
- SN95 Cobra Vortech Discharge Pipe, tapped for IAC and Screw in IAT sensor
- CX racing intercooler piping kit with additional couplers and pipes added
- Vortech maxflow blow off valve with K&N filter Attached
- 3" Blow off Valve Pipe/Flange
- Coolant Crossover Tube
- 8 Ford Racing 39lbs EV6 injectors
- 8 EV6 Adapters
- Anderson Power pipe with matching blue coupler installed
- K&N Filter
- SCT BA5000 Blow Though MAF
- 3" aluminum MAF housing
- Brand New never installed Napa Belt
- Screw in Motorcraft IAT sensor installed in discharge pipe.
Here is what you'll need to make this work on a 96-98 Cobra
- New Main bracket/idler/Mounting bolt Kit from superchargers online $299
http://www.superchargersonline.com/...nfo&cPath=510_1218_1219_1555&products_id=5353
- Tune
- Fuel Pump 255 or higher
- Spark Plugs
- Dremel to widen air intake fender hole for inter cooler piping.
Last edited: