This car was taken down to bare metal then all the metal work done and painted a super Orange color. This is not a kit under the hood its a hand made fabricated replacement for all the ugly holes. Cowl, wipers and antenna are smooth now. I have pictures of the entier build from strip down to engine build. Everything is new and Procharger was just rebuilt and put back on 1 week ago. I found something else to buy. Dont get it wrong, im not broke or need to sell this car. Asking price is $25,000 and that would cover the price to have the motor and trans built. Runs on 93 octane at 15 lbs of boost. Made 675 wrhp at 4650 RMP. Was making too much boost so we stopped the pull. Since then I added a Wastegate to control boost levels.
Dart Iron Eagle 363 (4.125 bore)
Scat H beam rods
Scat Forged Crank
Total Seal rings
Cleviette bearings
billit timing chain
Bullet custom tight lash solid roller cam
Comp solid roller lifters
Victor Jr intake manafold
Jesel 1.7 shaft mount rockers
Manly NexTek Springs
Moroso 9qt oil pan with kickout
Heavily worked Gen1 TW 2.08-1.60 TFS heads 338/286 @ 600
Felpro SD4 headgaskets
Hamberger performance valvecovers with -12 AN bung
Edelbrock waterpump
Kooks 1 3/4 longtubes 3.5" collectore jet hot coated
Pypes 3.5" X pipe, Dynomax 3.5" bullets
3 core radiator shroud with duel electric fans
16 gallon fuel cell
Magna fuel quickstar 300 fuel pump
aeromotive boost reference regulator
Custom Prosystems blowthrough carb
-10 AN black nylon braded feed line -8 AN black nylon braided return line
all Black anodized fuel fittings, earls fuel distrubition log
Procharger D1 Head unit oil fed (rebuilt less the 100 miles ago)
Black Nylon braided AN hose for oil lines
Procharger big red race valve, Wastegate, boost controler
-4 AN black nylon braided vacuum lines
Procharger Renagade bracket, Procharger carb Bonnet
UPR K member, UPR coilovers, UPR caster camber plates
Strange 10 way adjustable struts, Lakewood 50/50 shocks
UPR anti roll bar
Wolfe Racecraft 12 Pt Chromoly roll cage tig welded in
Crow window net
Through floor subframe connectors
Autometer ultra lite silver digital analog oil pressure gauge
Autometer ultra lite silver digital analog water temp gauge
Autometer ultra lite silver digital analog fuel pressure gauge
Autometer ultra lite silver analog boost/vacuum gauge
Innovate LM2 datalogger handheld wideband
Innovate wideband digital gauge
MSD Pro billit distrubitor
MSD boost reference retard box
MSD HVC coil
MSD digital 6 ignition box
Taylor 10.5MM wires
Ford racing 3.73 gears
Ford racing 31 spline diff with carbon clutches
Moser 31 spline axels with Moser C-Clip eliminators
Disc brake conversion, welded axle tubes
welded torque boxes
shaved cowl, shaved antenna hole, shaved wiper holes
rear seat delete
New red top Optima battery
Drag star Race Star wheels
New MT ET Street Drag radials, NEW MT front runners
ford racing perportin valve, new cobra brake booster
new tail lights, new headlights
all black interrior
Trans is a 3550 case and mainshaft, TKO 600 gears and 26 spline input, carbon fiber synchros on 2,3,4 brass on 1,5.
MCleod duel friction clutch disc, Promotion High Clamp pressure plate
Fredenza aluminum flywheel, Ford racing aluminum driveshaft, Pro 5.0 shifter
,Hurst shifter handle with button, UPR quadrant Steeda clutch cable
GT Grant steering wheel
Moroso aluminum catch can with -12 Black AN hose
Cervinis 2.5" cowl hood, new hood hinges, new hood hinge rubber cups
Team-Z lower control arms, Granatelli Upper control arms
custom radiator cover, MRT hood struts
Moroso on-off switch
New starter, New 140 amp altornator, custom brackets and idler pullies
Romac Balencer, Flaming river rack, flaming river steering arm
Black racing seats,5 point harnesses,
Please email me for pics or any other questions. [email protected]
Dart Iron Eagle 363 (4.125 bore)
Scat H beam rods
Scat Forged Crank
Total Seal rings
Cleviette bearings
billit timing chain
Bullet custom tight lash solid roller cam
Comp solid roller lifters
Victor Jr intake manafold
Jesel 1.7 shaft mount rockers
Manly NexTek Springs
Moroso 9qt oil pan with kickout
Heavily worked Gen1 TW 2.08-1.60 TFS heads 338/286 @ 600
Felpro SD4 headgaskets
Hamberger performance valvecovers with -12 AN bung
Edelbrock waterpump
Kooks 1 3/4 longtubes 3.5" collectore jet hot coated
Pypes 3.5" X pipe, Dynomax 3.5" bullets
3 core radiator shroud with duel electric fans
16 gallon fuel cell
Magna fuel quickstar 300 fuel pump
aeromotive boost reference regulator
Custom Prosystems blowthrough carb
-10 AN black nylon braded feed line -8 AN black nylon braided return line
all Black anodized fuel fittings, earls fuel distrubition log
Procharger D1 Head unit oil fed (rebuilt less the 100 miles ago)
Black Nylon braided AN hose for oil lines
Procharger big red race valve, Wastegate, boost controler
-4 AN black nylon braided vacuum lines
Procharger Renagade bracket, Procharger carb Bonnet
UPR K member, UPR coilovers, UPR caster camber plates
Strange 10 way adjustable struts, Lakewood 50/50 shocks
UPR anti roll bar
Wolfe Racecraft 12 Pt Chromoly roll cage tig welded in
Crow window net
Through floor subframe connectors
Autometer ultra lite silver digital analog oil pressure gauge
Autometer ultra lite silver digital analog water temp gauge
Autometer ultra lite silver digital analog fuel pressure gauge
Autometer ultra lite silver analog boost/vacuum gauge
Innovate LM2 datalogger handheld wideband
Innovate wideband digital gauge
MSD Pro billit distrubitor
MSD boost reference retard box
MSD HVC coil
MSD digital 6 ignition box
Taylor 10.5MM wires
Ford racing 3.73 gears
Ford racing 31 spline diff with carbon clutches
Moser 31 spline axels with Moser C-Clip eliminators
Disc brake conversion, welded axle tubes
welded torque boxes
shaved cowl, shaved antenna hole, shaved wiper holes
rear seat delete
New red top Optima battery
Drag star Race Star wheels
New MT ET Street Drag radials, NEW MT front runners
ford racing perportin valve, new cobra brake booster
new tail lights, new headlights
all black interrior
Trans is a 3550 case and mainshaft, TKO 600 gears and 26 spline input, carbon fiber synchros on 2,3,4 brass on 1,5.
MCleod duel friction clutch disc, Promotion High Clamp pressure plate
Fredenza aluminum flywheel, Ford racing aluminum driveshaft, Pro 5.0 shifter
,Hurst shifter handle with button, UPR quadrant Steeda clutch cable
GT Grant steering wheel
Moroso aluminum catch can with -12 Black AN hose
Cervinis 2.5" cowl hood, new hood hinges, new hood hinge rubber cups
Team-Z lower control arms, Granatelli Upper control arms
custom radiator cover, MRT hood struts
Moroso on-off switch
New starter, New 140 amp altornator, custom brackets and idler pullies
Romac Balencer, Flaming river rack, flaming river steering arm
Black racing seats,5 point harnesses,
Please email me for pics or any other questions. [email protected]
