the injectors have only start-up time on them. and the aem is in perfect condition..525.00 SHIPPEDE FOR ALL.
FEATURES:
Genuine, reliable Siemens Injectors
Excellent response characteristics
Robust Design
Low Impedance
Specifications:
Coil Resistance: 2.35 Ohms / Low Impedance / Low-Z (Peak/Hold driver circuit required)
Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 86.2 lb/hr = 888 cc/min = 652.2 g/min
Connector: Bosch EV1
Spray Pattern: Pencil
Factory fitted with Viton upper and lower o-rings
Equivalent Part Numbers:
Siemens FI11405 ( 3105 )
AND HERE ARE THE SPECS FOR THE AEM DRIVER.................
AEM - Peak & Hold Injector Driver Module*
FEATURES:
Genuine, reliable Siemens Injectors
Excellent response characteristics
Robust Design
Low Impedance
Specifications:
Coil Resistance: 2.35 Ohms / Low Impedance / Low-Z (Peak/Hold driver circuit required)
Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 86.2 lb/hr = 888 cc/min = 652.2 g/min
Connector: Bosch EV1
Spray Pattern: Pencil
Factory fitted with Viton upper and lower o-rings
Equivalent Part Numbers:
Siemens FI11405 ( 3105 )
AND HERE ARE THE SPECS FOR THE AEM DRIVER.................
AEM - Peak & Hold Injector Driver Module*