I am putting up my 1997 4V mustang cobra motor up for sale Going to be doing a coyote swap. It is a built motor. Was built 1/05 by Boss 330 racing (AL Papitto). I has about 35 races on it. It is being used in a road race musatang.
It is still in the car as of this posting (3/28/13). It still runs and has no smoke. It will be out of the car in the next week. Oil changed after every race weekend. also have a few extra parts for the motor.
Dyno numbers are 338HP 330TQ
Here is a list of the build
8) Engine
a) Heads: 03 Cobra (stock seals, springs shimmed, .0025 surfaced)
b) Compression 11.25:1
c) Injectors 24#
d) ARP bolts
e) Mahle Pistons (flat top)/Manley Rods
f) Federal Mogul Main & Rod bearings
g) Billet oil pump rotors
h) Intake manifold upper/lower 01 Cobra
i) 01 Cobra valve covers
l) Plugs - Autolite 765 copper changed Nov-12
m) Evans Cooling Billet water pump
n) Plug wires: chged 2/09
o) Coils -- 2 yrs old?
p) Serpentine belt -- chged 2/11
q) Engine built by Al Pappito Jan 2005
b) Evans Cooling billet pump
a) Ford shorty headers
asking 3250 not including shipping. buyer pays for shipping
The motor is located at Ramsey's performance in Lutz
If you have any questions call 5612827466 thank you .
It is still in the car as of this posting (3/28/13). It still runs and has no smoke. It will be out of the car in the next week. Oil changed after every race weekend. also have a few extra parts for the motor.
Dyno numbers are 338HP 330TQ
Here is a list of the build
8) Engine
a) Heads: 03 Cobra (stock seals, springs shimmed, .0025 surfaced)
b) Compression 11.25:1
c) Injectors 24#
d) ARP bolts
e) Mahle Pistons (flat top)/Manley Rods
f) Federal Mogul Main & Rod bearings
g) Billet oil pump rotors
h) Intake manifold upper/lower 01 Cobra
i) 01 Cobra valve covers
l) Plugs - Autolite 765 copper changed Nov-12
m) Evans Cooling Billet water pump
n) Plug wires: chged 2/09
o) Coils -- 2 yrs old?
p) Serpentine belt -- chged 2/11
q) Engine built by Al Pappito Jan 2005
b) Evans Cooling billet pump
a) Ford shorty headers
asking 3250 not including shipping. buyer pays for shipping
The motor is located at Ramsey's performance in Lutz
If you have any questions call 5612827466 thank you .
Last edited:
