Up for sale is my 2003 ZY Cobra. I am asking $20,000 OBO, or $19,000 with the stock wheels back on. I will also remove the NOS kit and sell it separately if needed just let me know. It has a little over 32,000 miles and the usual rock chips on the front clip and hood as it was my DD until a week ago but nothing major. Anyway on to the good stuff, the mods:
Steggy stage IV with 2.93 upper, 4lb lower
Full Billetflow Idler set with idle tensioner
Accufab TB and plenum with drive ability mod
NGK TR7IX plugs
Mafia
JLT RAI (just bought three weeks ago)
SD 60# injectors
KB BAP
Dual Ford GT pumps
LFP race radiator, dual pass heat exchanger, radiator and IC expansion tanks
New thermostat and IC pump
UPR Chromoly K member kit with drag springs
Coil overs in front
H&R Sport Springs in rear
Maximum Motorsports CC plates
MGW Shifter w/ Cobrabob gasket
Hilton boost overlay
RAM 900 clutch
26 spline input shaft
Steeda clutch quadrant
Steed clutch adjuster
MM IRS Grip Box, part # MMRG-21
FRPP 3.73 gears, new seals and gaskets installed as well from Tousley Ford
Billetflow IRS brace
BBK LT headers
Lethal Performance o/r x
Magnaflow catback
Black American Racing 03 replicas, 17x9 in front, 17x10.5 in rear
Front tires are BFG's with some decent life left, rears are 315 MT street radials with 3/8 spacers
Optima Yellow Top battery
Hawk ceramic pads all around
SS brake lines up front
Tinted windows
Black COBRA bumper insert
NOS 100 shot installed. It has been sprayed maybe five times, including the tuning as I just had the window switch installed last week and have not been to the track.
MSD Window Switch
HIDguys dual beam kit, with fog lights as well (looks killer at night)
I have the stock satin wheels that I can include if interested. I also have some parts in my garage that have not been installed yet: Killer Chiller; Meziere electric water pump; SHM blower cams; BAER brake kit (fits 18" wheels or larger though). I have the strut tower brace I took off as well, but it won't fit the JLT RAI unless it is modified; and a remote bottle opener. If the buyer is interested in these items the price will be adjusted accordingly, I can't just afford to throw them in on the sale unless you make me a better offer than my listed price. I will check my garage and see if there is anything else I am missing. I will get an up to date under hood pic if anyone is interested, just let me know. On to the pics posted below:
Please PM me if you are interested or call my cell at 214-886-3980...
Steggy stage IV with 2.93 upper, 4lb lower
Full Billetflow Idler set with idle tensioner
Accufab TB and plenum with drive ability mod
NGK TR7IX plugs
Mafia
JLT RAI (just bought three weeks ago)
SD 60# injectors
KB BAP
Dual Ford GT pumps
LFP race radiator, dual pass heat exchanger, radiator and IC expansion tanks
New thermostat and IC pump
UPR Chromoly K member kit with drag springs
Coil overs in front
H&R Sport Springs in rear
Maximum Motorsports CC plates
MGW Shifter w/ Cobrabob gasket
Hilton boost overlay
RAM 900 clutch
26 spline input shaft
Steeda clutch quadrant
Steed clutch adjuster
MM IRS Grip Box, part # MMRG-21
FRPP 3.73 gears, new seals and gaskets installed as well from Tousley Ford
Billetflow IRS brace
BBK LT headers
Lethal Performance o/r x
Magnaflow catback
Black American Racing 03 replicas, 17x9 in front, 17x10.5 in rear
Front tires are BFG's with some decent life left, rears are 315 MT street radials with 3/8 spacers
Optima Yellow Top battery
Hawk ceramic pads all around
SS brake lines up front
Tinted windows
Black COBRA bumper insert
NOS 100 shot installed. It has been sprayed maybe five times, including the tuning as I just had the window switch installed last week and have not been to the track.
MSD Window Switch
HIDguys dual beam kit, with fog lights as well (looks killer at night)
I have the stock satin wheels that I can include if interested. I also have some parts in my garage that have not been installed yet: Killer Chiller; Meziere electric water pump; SHM blower cams; BAER brake kit (fits 18" wheels or larger though). I have the strut tower brace I took off as well, but it won't fit the JLT RAI unless it is modified; and a remote bottle opener. If the buyer is interested in these items the price will be adjusted accordingly, I can't just afford to throw them in on the sale unless you make me a better offer than my listed price. I will check my garage and see if there is anything else I am missing. I will get an up to date under hood pic if anyone is interested, just let me know. On to the pics posted below:
Please PM me if you are interested or call my cell at 214-886-3980...
Last edited:
