front splitters - high speed

[wakebum2507]

so for the upcoming season, the car will be seeing many many more 160+ mph blasts. that being said, i've got a roush splitter. i've reinforced with aluminum so it can't rip off the bumper, BUT it does fold over nicely at 170 or so.

i've seen this Cervinis gt500 look alike, but didn't know if anyone has any experience with it, or has other suggestions on one that will hold up to some high speed runs, without folding over like a crepe.

http://www.cervinis.com/13-14mustang-gt500-style-chin-spoiler.html

 

[4VFTW]

I have the cervinis and while I don't have any experience with it over 140mph, it does have open slots that should allow air to pass through it and it is well secured so don't see it being an issue. Be advised the splitter c omes in white and must be painted.

 

[101blur]

My splitters have held up to over 180mph runs and seen countless track time tuff as nails if installed properly they aren't coming off unless your bumper does.
additional support rods can always be added too.
feel free to shot me a DM for more info happy to help if its something you are looking for.

constructed from 3/8" thick "king star board" HDPE
routed out with beveled lower edge and have available custom engraving for a nice persona touch.

 

[Vert]

I have the cervinis and while I don't have any experience with it over 140mph, it does have open slots that should allow air to pass through it and it is well secured so don't see it being an issue. Be advised the splitter c omes in white and must be painted.

Doesn't the cervinis fit over the stock splitter or is it the stillen splitter. You could look into the sillen since it has the turnbuckles for extra support.

 

[el jefe 302]

Get a 101blur splitter or anything ford FRPP makes, the world challenge or laguna splitter. All of these choices will be solid and have been track tested and proven.

If you go with a mickey mouse splitter you will be wondering when/if it will fail at high speed...