Front Fuel Rail Crossover-Who's running one? Pics Please

[lescok]

Hey Guys, trying to get ideas for my front fuel rail crossover, Trying to keep it stealthy going under the blower. Anyone have pics of their similar set ups? If using Fore rails that's a big plus. Thanks in advance

 

[GodStang]

Return or returnless? I did a crossover in the front on my returnless setup and did it one the back on my return system.

 

[BLU3VN0M]

The way I ran mine is somewhat stealthy; it's just a very short run, almost straight across. I know its somewhat different because i'm reverse mounting the intake on my twin setup, but the idea is still the same.

 

[Blown38]

This is on a Marauder that I modified the COT down to clear the blower snout. Not sure how low the Terminator COT is compared to mine. I had Orme Brothers in CA bend and crimp everything by my measurements. Hit it on the first try! This is also with a 3.4 whipple.

Excuse the ugly weld there. Must have been some remaining coolant in the tube.

 

[matthayn]

^ That's a tight fit! Definitely hidden.

In for pics, would like to re-do mine as well.

 

[Blown38]

Here is another I did with the crossover in back.

 

[lescok]

Nice guys keep them coming. Anyone with the newer Fore rails running the front crossover?- Step in

 

[cj428mach]

Here is my thread, I started a long time ago.

http://www.svtperformance.com/forums/showthread.php?1024689-Front-crossover-with-return-fuel-system

And here is how the car is currently configured.

In order to burp the coolant crossover I have to loosen the fitting and move the drivers side to about 4-5 "o"clock then retighten it to start the car.

 

[cozmo2806]

Here is one I did.