Asking $5,500 O.B.O. I want a local sale to avoid shipping it, or the buyer can pick it up. I have it on e-bay / craigslist also. Engine located in Conroe TX (just north of Houston).
for fastest response to questions / offers please email me: [email protected]
All build work done profesionally by Houston Performance New Page 1 in Houston TX. I have the receipts for all the work done and most of the parts. I just bought a 2013 Taurus SHO (new hot rod) now I need to cash to buy a new house. This engine was built in mind to be a good street engine for my 1968 Mustang and have good vacuum and idle to run with power steering and a/c, make good power to 6k rpms, but main focus on low end power. I planned to run it with my AOD.
Here's a desktop dyno (very nice low rpm torque and nice peak hp / rpm)
RPM / Power / Torque / Pressure Eff% Pressure
2000...143........374........14.67 73.9 165.0
2500...186........391........14.64 78.7 172.5
3000...232........406........14.60 82.0 179.0
3500...280........420........14.55 85.9 185.3
4000...330........433........14.49 89.6 191.1
4500...377........440........14.41 91.7 193.8
5000...419........440........14.32 93.4 194.0
5500...449........428........14.22 93.7 188.8
6000...462........404........14.13 91.9 178.2
6500...461........373........14.06 89.0 164.3
7000...450........337........14.00 85.5 148.7
7500...435........304........13.96 81.7 134.1
$100.00 1991 Mustang 302 roller block
$1,199.00 Balanced 347 stroker kit Eagle crank / rods with Mahle pistons / balancer / flexplate
$750.00 block machine work /assembly / stroker clearancing
$300.00 assembly / labor
$1,500.00 AFR 185 heads with 58cc chamber heads
$50.00 Hardened push rods
$150.00 Comp dual Valve springs
$120.00 ARP head studs
$299.00 Valve job
$300.00 Comp cams custom grind roller camshaft
110 lobe separation / Lift .544intake .555exhaust duration 281 / 287 (cam card provided)
$300.00 Trick Flow 1.6 ratio roller rocker arms
$300.00 Edelbrock 750cfm carburetor
$392.90 Edelbrock Performer RPM Air Gap intake (dual plane / Endurashine finish)
$50.00 New cam bearings
$30.00 New freeze plugs
$18.00 Rear main seal
$65.09 Melling 10687 oil pump (+3PSI)
$105.00 head / intake gaskets
$39.00 ARP stainless intake bolts
$69.00 Ford Motorsports double roller timing chain
$6,136.99 Total
It will also include:
Oil pan, oil pump pick up (91 Mustang), valve covers (EFI), serpentine accessories, water pump, alternator / bracket, power steering pump bracket ?, EFI timing chain cover, crank pulley, new engine stand ($70),
for fastest response to questions / offers please email me: [email protected]
All build work done profesionally by Houston Performance New Page 1 in Houston TX. I have the receipts for all the work done and most of the parts. I just bought a 2013 Taurus SHO (new hot rod) now I need to cash to buy a new house. This engine was built in mind to be a good street engine for my 1968 Mustang and have good vacuum and idle to run with power steering and a/c, make good power to 6k rpms, but main focus on low end power. I planned to run it with my AOD.
Here's a desktop dyno (very nice low rpm torque and nice peak hp / rpm)
RPM / Power / Torque / Pressure Eff% Pressure
2000...143........374........14.67 73.9 165.0
2500...186........391........14.64 78.7 172.5
3000...232........406........14.60 82.0 179.0
3500...280........420........14.55 85.9 185.3
4000...330........433........14.49 89.6 191.1
4500...377........440........14.41 91.7 193.8
5000...419........440........14.32 93.4 194.0
5500...449........428........14.22 93.7 188.8
6000...462........404........14.13 91.9 178.2
6500...461........373........14.06 89.0 164.3
7000...450........337........14.00 85.5 148.7
7500...435........304........13.96 81.7 134.1
$100.00 1991 Mustang 302 roller block
$1,199.00 Balanced 347 stroker kit Eagle crank / rods with Mahle pistons / balancer / flexplate
$750.00 block machine work /assembly / stroker clearancing
$300.00 assembly / labor
$1,500.00 AFR 185 heads with 58cc chamber heads
$50.00 Hardened push rods
$150.00 Comp dual Valve springs
$120.00 ARP head studs
$299.00 Valve job
$300.00 Comp cams custom grind roller camshaft
110 lobe separation / Lift .544intake .555exhaust duration 281 / 287 (cam card provided)
$300.00 Trick Flow 1.6 ratio roller rocker arms
$300.00 Edelbrock 750cfm carburetor
$392.90 Edelbrock Performer RPM Air Gap intake (dual plane / Endurashine finish)
$50.00 New cam bearings
$30.00 New freeze plugs
$18.00 Rear main seal
$65.09 Melling 10687 oil pump (+3PSI)
$105.00 head / intake gaskets
$39.00 ARP stainless intake bolts
$69.00 Ford Motorsports double roller timing chain
$6,136.99 Total
It will also include:
Oil pan, oil pump pick up (91 Mustang), valve covers (EFI), serpentine accessories, water pump, alternator / bracket, power steering pump bracket ?, EFI timing chain cover, crank pulley, new engine stand ($70),
Last edited: