I have C-clip eliminators and stock length Moser axles on my Cobra. Can I switch to a fox length axles and use North Cobra brackets and existing brakes/rotor? What else would i need to complete the swap. Thx.
Fox length axles with stock brakes
- Thread starter cobroc
- Start date
All you need are the stock length axles and the North Cobra brackets and you are good to go. Everything else is on your cobra. The only thing you might want to check are the hardware bolts used. Just to make sure they are not too long or long enough for the caliper to bolt to the North Cobra backing plate. So they don't interfere with anything and have plenty of bite on the threads.
Bob beat me to it!
Users who are viewing this thread
