Selling some fuel system goodies and random stuff kicking around the garage. All prices INCLUDE SHIPPING.
Fuel system:
PRICE SOLD shipped
- FORE Tripple fuel hat w/ upgraded wiring and fuel pickup harness (currently setup for dual pump use, 3rd outlet is capped)
- Dual -6AN PTFE lines from fuel hat to y-block
- NOS y-block for dual -6an to single -8an lines
- Single -8AN PTFE line with trick flow inline fuel filter
- Single -8AN PTFE line from filter to fuel rail
- Stock fuel rail with -8AN adapter fitting (FRPS not included)
- PTFE is gas/e85 compatible and has NO gassy smell like the EPDM lines do.
- Will separate if lines are bought FIRST ($150 for lines, $400 for hat)
Fuel injectors:
PRICE SOLD shipped
- Siemens Dekka
- Low km, had these on my car before upgrading to 80s (maybe 4000km)
- EV6 so no adaptors needed
- Same as FRPP 60lb injectors
- If you do your own tuning I can send you the value file to run these
- one o-ring is blue since I tore the original during install. no leaks as they stand
FORD RACING Billet CNC COP covers
PRICE (SOLD) shipped
- These are the no-longer produced Billet/CNC covers with the large FRPP logo
- Gasket included
- One small blemish as seen in pics
WMS Fenderwell intake
PRICE $80 shipped
- WMD silver ceramic coated fender well inlet elbow
- MAF mounts directly to it (I had it with a BA2600, will work with stock too)
- Some scratches on the bottom that are not visible when installed (see pics)
- http://www.wmsracing.com/wmsweb/VEL...3-Cobra-and-High-Velocity-Intake-ceramic.html
OEM Bullitt mustang stainless steel fuel door
PRICE $40 shipped
- OEM piece with FoMoCo part number
- Strong spring and no scratches
Prices are pretty firm BUT with that said send your offers and worst I can do is say no. Also open to some go-fast goodies as trades... try your offers. Parts are located in Dearborn Michigan, local sales can save on shipping. Pics Below!
Thanks,
Victor
Fuel Sys:
60lb SD Injectors:
FRPP COP:
WMS Intake and Bullitt Fuel Door:
Fuel system:
PRICE SOLD shipped
- FORE Tripple fuel hat w/ upgraded wiring and fuel pickup harness (currently setup for dual pump use, 3rd outlet is capped)
- Dual -6AN PTFE lines from fuel hat to y-block
- NOS y-block for dual -6an to single -8an lines
- Single -8AN PTFE line with trick flow inline fuel filter
- Single -8AN PTFE line from filter to fuel rail
- Stock fuel rail with -8AN adapter fitting (FRPS not included)
- PTFE is gas/e85 compatible and has NO gassy smell like the EPDM lines do.
- Will separate if lines are bought FIRST ($150 for lines, $400 for hat)
Fuel injectors:
PRICE SOLD shipped
- Siemens Dekka
- Low km, had these on my car before upgrading to 80s (maybe 4000km)
- EV6 so no adaptors needed
- Same as FRPP 60lb injectors
- If you do your own tuning I can send you the value file to run these
- one o-ring is blue since I tore the original during install. no leaks as they stand
FORD RACING Billet CNC COP covers
PRICE (SOLD) shipped
- These are the no-longer produced Billet/CNC covers with the large FRPP logo
- Gasket included
- One small blemish as seen in pics
WMS Fenderwell intake
PRICE $80 shipped
- WMD silver ceramic coated fender well inlet elbow
- MAF mounts directly to it (I had it with a BA2600, will work with stock too)
- Some scratches on the bottom that are not visible when installed (see pics)
- http://www.wmsracing.com/wmsweb/VEL...3-Cobra-and-High-Velocity-Intake-ceramic.html
OEM Bullitt mustang stainless steel fuel door
PRICE $40 shipped
- OEM piece with FoMoCo part number
- Strong spring and no scratches
Prices are pretty firm BUT with that said send your offers and worst I can do is say no. Also open to some go-fast goodies as trades... try your offers. Parts are located in Dearborn Michigan, local sales can save on shipping. Pics Below!
Thanks,
Victor
Fuel Sys:
60lb SD Injectors:
FRPP COP:
WMS Intake and Bullitt Fuel Door:
Attachments
Last edited:
