No, it will not. The puller works on the premise of the pulley having that ridge to hook into to pull it out. Now, the method for installing the pulley would work but the thread on the s/c snout is diff than the p/s pump.
Everybody says you have to have that specific puller just for the supercharger pulley. I disagree. I used a plain ol' pulley puller that I rented from autozone. It had 3 "fingers" that gripped the pulley. Came off no problem and the pulley is undamaged. I put the new pulley on with a long bolt, some washers and a nut. This all cost me nothing, after my deposit was returned.