Ford Part number F6ZZ-6L626-AA

[1999marg]

Dam anyone know where I can get another oil cooler insert stud? It holds the oil cooler to the block and is the stud that you use to screw in your oil filter. Plus it has an O-ring on the stud that keeps the coolant and oil seperated. Ford no longer makes them.....

Thanks for the help

 

[99Cobra_vert]

I have one I can send you.

 

[01rowlandcobra]

I also have one

 

[fastback brian]

that oring doesn't separate coolant and oil. it really doesnt do much, oil is on both sides. if anything, that oring just keeps some oil from bypassing the cooler, if that.

 

[quick01snake]

that oring doesn't separate coolant and oil. it really doesnt do much, oil is on both sides. if anything, that oring just keeps some oil from bypassing the cooler, if that.

So it keeps pre-filter oil separate from post-filter oil? Yeah that's not important. LOL

 

[DuffManRHA]

So it keeps pre-filter oil separate from post-filter oil? Yeah that's not important. LOL

:lol1: Another useless Ford part

 

[fastback brian]

So it keeps pre-filter oil separate from post-filter oil? Yeah that's not important. LOL

cooler or filter?. Cause that oring has nothing to do with the filter.

 

[cobra_sd]

I know this is an old thread, but I had an external oil leak, and I think the o-ring that is attached to this part was the root cause. Do you still have an extra part that you would be willing to part with? Thanks,

 

[16Vto32V]

This may be a long shot but does anyone here have or know where I can buy the FZ66 6L626 AA center bolt for the 2001 cobra engine oil cooler?
Any advice would be extremely helpful.

 

[01yellercobra]

http://www.speedconcepts.net/product_info.php?products_id=967