Somebody is in for a treat! :burnout: This is a gorgeous Polished KB set-up. With the current Reichard Racing pulley and the Chrome single blade oval accufab throttlebody the unit puts out and holds 20lbs without breaking a sweat. Max is 27lbs. The deal includes the polished Plenum as well. The blower has about 5-6k miles on it. It came off a motor that will soon be rebuilt. Hate to let her go but I have a stage 4 that will hold me a while as gather funds for the rebuild.
Here's Some info on the Blower:
• INSTANT FULL BOOST / HORSEPOWER & TORQUE at ANY rpm
• Direct bolt on replacement. Easily installed.
• More power, cooler charge temp, less power consumption/parasitic loss than stock Eaton.
• 90% efficiency.
• Approx. 13 psi gain per 1 psi boost.
• 30% less parasitic loss and 30% lower air charge temp at same HP.
• +70HP gain at 13 psi (489 vs 417).
• Best $ value bolt on. More power than headers, cam, throttle body, MAF meter, chip and filter COMBINED.
• 38HP at 13 psi just from reduced power consumption.
• No "boost drop off" (stock Eaton is 13 psi @ 4000 and only 10.5 psi @ 6000).
• No "boost lag" as with centrifugals and turbos.
• Quick and easy 4 minute pulley/boost changes.
• Boost range 9*- 27psi.
• Billet aluminum construction.
• Whisper quiet.
• Billet bypass valve.
• Internally lubricated. No tapping holes in pan required.
• Doesn't use engine oil.
• Looks factory.
• polished finish
• Accugab Oval Throttle body and KB polished plenum.
*50 State Legal
I can be reached at 561-706-6566 if you have any questions.
$2975 shipped!
Here's Some info on the Blower:
• INSTANT FULL BOOST / HORSEPOWER & TORQUE at ANY rpm
• Direct bolt on replacement. Easily installed.
• More power, cooler charge temp, less power consumption/parasitic loss than stock Eaton.
• 90% efficiency.
• Approx. 13 psi gain per 1 psi boost.
• 30% less parasitic loss and 30% lower air charge temp at same HP.
• +70HP gain at 13 psi (489 vs 417).
• Best $ value bolt on. More power than headers, cam, throttle body, MAF meter, chip and filter COMBINED.
• 38HP at 13 psi just from reduced power consumption.
• No "boost drop off" (stock Eaton is 13 psi @ 4000 and only 10.5 psi @ 6000).
• No "boost lag" as with centrifugals and turbos.
• Quick and easy 4 minute pulley/boost changes.
• Boost range 9*- 27psi.
• Billet aluminum construction.
• Whisper quiet.
• Billet bypass valve.
• Internally lubricated. No tapping holes in pan required.
• Doesn't use engine oil.
• Looks factory.
• polished finish
• Accugab Oval Throttle body and KB polished plenum.
*50 State Legal
I can be reached at 561-706-6566 if you have any questions.
$2975 shipped!
