First of all i copied and edited what the previous owner had posted, some things are a little different but not much.
NEW ASKING PRICE 10,700. IT NEEDS TO GO!!
Im asking $11,000 for the car, reason for selling is my financial situation is different than before, the cars runs great, minor driveshaft rub that comes and goes, but only when its hammered, the motors torque pushes the drivesshaft up a very little bit which rubs where the two body parts come together, all it needs is the be cut out with a sawzall and there won't be any other problems.
Also i might add that the price will more than likely be going up in spring or earlier because this cars worth overalll a lot more than im asking...
It put down 503hp/507tq to the wheels. . The body has about 90k on it and the motor has roughly 22k on it. Clean title. I have a 4" binder with the whole build of the motor/reciepts. And yes it is a real Cobra.
Gauges
Fuel Pressure
Oil Pressure
Boost
WMS wideband
Intake temp
Water temp
Pyrometer
SVT tach overlay
Exterior
HO fibertrends Cobra R hood
Saleen S281 spoiler
LED third brake light
SS inserts Cobra in bumper
Smoked headlights/fogs
Painted black mirrors
IT NOW HAS SALEEN RIMS
Built 03 motor
Teksid block bored .020 over
Diamond racing pistons 9.7:1 compression
Manley H-beams
Ported 03 heads
Unported eaton, 2.9 SHM upper pulley
4 pc Metco idler set
03 cams, timing chains, etc..
Cantan 9qt oil pan
Accufab throttle body/plenum
Cooling
Fluidyne radiator
Canton coolant overflow tank
LDC head cooling mod
Afco heat exchanger
Exhaust
JBA shortie headers
UPR o/r x pipe
Mac catback
Fuel
Aeromotive fuel rails
Aeromotive fuel pressure reg.
60lb Siemens Deka injectors
SS fuel lines in engine compartment
-6AN SS fuel feed line
Walbro 255 lph fuel pump
T-Rex inline pump
Summit fuel filter
SCT2400 maf/chip
Drivetrain
T-45 transmission
Spec stage 3 clutch
Fidanza flywheel
FRPP aluminum DS
Stock rear end with 3:73 gear
Suspension
Eibach sportlines
QA1 struts
Monroe shocks
Steeda adjustable LCAs
Steeda caster/camber plates
I will Post new Pics Soon, but Most Pics are still the same on the other thread titled Black 97 Cobra 03 Motor
http://s753.photobucket.com/albums/xx176/higgins363/
heres the link i think it will work if you just copy to address bar...
NEW ASKING PRICE 10,700. IT NEEDS TO GO!!
Im asking $11,000 for the car, reason for selling is my financial situation is different than before, the cars runs great, minor driveshaft rub that comes and goes, but only when its hammered, the motors torque pushes the drivesshaft up a very little bit which rubs where the two body parts come together, all it needs is the be cut out with a sawzall and there won't be any other problems.
Also i might add that the price will more than likely be going up in spring or earlier because this cars worth overalll a lot more than im asking...
It put down 503hp/507tq to the wheels. . The body has about 90k on it and the motor has roughly 22k on it. Clean title. I have a 4" binder with the whole build of the motor/reciepts. And yes it is a real Cobra.
Gauges
Fuel Pressure
Oil Pressure
Boost
WMS wideband
Intake temp
Water temp
Pyrometer
SVT tach overlay
Exterior
HO fibertrends Cobra R hood
Saleen S281 spoiler
LED third brake light
SS inserts Cobra in bumper
Smoked headlights/fogs
Painted black mirrors
IT NOW HAS SALEEN RIMS
Built 03 motor
Teksid block bored .020 over
Diamond racing pistons 9.7:1 compression
Manley H-beams
Ported 03 heads
Unported eaton, 2.9 SHM upper pulley
4 pc Metco idler set
03 cams, timing chains, etc..
Cantan 9qt oil pan
Accufab throttle body/plenum
Cooling
Fluidyne radiator
Canton coolant overflow tank
LDC head cooling mod
Afco heat exchanger
Exhaust
JBA shortie headers
UPR o/r x pipe
Mac catback
Fuel
Aeromotive fuel rails
Aeromotive fuel pressure reg.
60lb Siemens Deka injectors
SS fuel lines in engine compartment
-6AN SS fuel feed line
Walbro 255 lph fuel pump
T-Rex inline pump
Summit fuel filter
SCT2400 maf/chip
Drivetrain
T-45 transmission
Spec stage 3 clutch
Fidanza flywheel
FRPP aluminum DS
Stock rear end with 3:73 gear
Suspension
Eibach sportlines
QA1 struts
Monroe shocks
Steeda adjustable LCAs
Steeda caster/camber plates
I will Post new Pics Soon, but Most Pics are still the same on the other thread titled Black 97 Cobra 03 Motor
http://s753.photobucket.com/albums/xx176/higgins363/
heres the link i think it will work if you just copy to address bar...
Last edited: