FMS performance suspension and sway bar relocation kit issues

[TexasSpeed]

I have the full FMS suspension package on my '08. On a whim, I purchased a set of big & littles. To make them fit, I had to get a sway bar relocation bracket. I installed it and went to bolt the sway bar and the new, higher positioning has the sway bar hitting my lower control arm relocation brackets.... Those with this setup, how are you moving your sway bars up to acomodate 15" wheels? If my sway bar hits, my only option is to remove the sway bar for track days and install it for regular driving, with is a PITA...

Thanks - Todd

 

[NIXDSG]

I had the SAME issue on my 2014. I tried to make a little clearance but never made it work, I ended up getting the BMR SB024 sway bar. While this provided the clearance with the LCA it never really fit how I thought it should, but it worked.

NIXDSG

 

[rotor_powerd]

I had the same issue - all BMR stuff, the sway bar would hit the LCA relocation brackets while the car was in the air. Had to put weight on the axle to get it to not contact.

 

[Fast Ford]

TexasSpeed, You have the Ford Performance suspension kit?

 

[TexasSpeed]

TexasSpeed, You have the Ford Performance suspension kit?

Yes - I've since switched to coil overs in the rear but, the rest is straight from the FMS package.

 

[Fast Ford]

Yes - I've since switched to coil overs in the rear but, the rest is straight from the FMS package.

Relocation brackets will not work with the Ford Racing rear sway bar. I had that issue with the FRPP rear bar and had to switch to BMR's SB042 rear sway bar.