Few 03-04 motor questions?????

[Brizzal84]

I'm going to be putting a 03 cobra motor in my 96 cobra. my questions are:
1 will the stock hood clear the o3 blower?
2 how much boost will the stock injectors handle?
3 What you everyone say about useing a viper spec t-56?

Any help would be great thanks everyone.

 

[onepowerfulpony]

1. YES, it will clear. You may have to take the hood mat out, but it will clear.
2. Depends on the tune. You can map injectors and allow for a little more flow than a normal stock injector. 400HP, Give or take.
3. Question makes no sense. The T-56's are badd ass.

 

[PSUCOBRA96]

(1) I dont know, (2) i would figure the stock injectors will handle more than 400 hp as when the terminators first came out people were changing pulleys before they were chaning the injectors, im thinking they can handle more like 450, and (3) the viper spec isa much better version of the t-56 than the stock terminator ones

-where did you get the motor and trans from?

 

[crazycarlo]

Everyone Ive talked to who has a 03 motor in their car had to do something like put spacers on the motor mount to raise the body up to get it to clear the stock hood.

 

[Cookieman00x]

1) I think the motor has to be lowered about an inch to get it to clear correctly.
2) 03-04 stock injectors or your 96 injectors?
3) the t56 is a very strong trans and the version in the viper has a better over drive gears, helping the car get better MPH on the highway. Also, its a 6 speed, you can run steeper gears and not be in high rpm's on the higway.