I’m considering selling my turbo kit. It’s a modified Turbocharged Innovation system. I invested about $1K in upgrades last winter. I added a Treadstone TRV25 Intercooler reworked the cold pipping...the inlet and outlet on same side to reduce piping and to allow room to run 4" open downpipe (Included)
V-bands replace lap bands throughout 3” exhaust, ball and flange still utilized to connect to cat back. It comes with 70mm Master Power turbo with .81AR Precision Exhaust housing, Tial 38mm WG Turbosmart Raceport BOV and Hallman MBC.
I made 573RWHP after initial install @ 16lbs boost & 16* timing through full exhaust.
The kit has made 687 on pump gas and meth by previous owner.
http://forums.corral.net/forums/gt-sohc/1208375-dyno-results-today.html
No issues, no leaks, fit and quality are excellent! I wouldn't hesitate to drive anywhere. I run a MM K-member which is doesn't have much clearance and it fits...UPR QA1 ect have much more but, you may have to modify 3” Pipe through K member with other K members to run full exhaust. Open DP should work with all of them.
You will need pipe from throttle body to fender (Fender to Intercooler included) just about any CAI will work.
Here some pics…you can also go to my build thread to see more http://forums.corral.net/forums/turbochargers/1412909-01-saleen-turbo-build.html
Kit is still on car. Some photos are before and during the upgrades/Treadstone IC ect. if I find a serious buyer I'll remove it. $1900
Thanks
V-bands replace lap bands throughout 3” exhaust, ball and flange still utilized to connect to cat back. It comes with 70mm Master Power turbo with .81AR Precision Exhaust housing, Tial 38mm WG Turbosmart Raceport BOV and Hallman MBC.
I made 573RWHP after initial install @ 16lbs boost & 16* timing through full exhaust.
The kit has made 687 on pump gas and meth by previous owner.
http://forums.corral.net/forums/gt-sohc/1208375-dyno-results-today.html
No issues, no leaks, fit and quality are excellent! I wouldn't hesitate to drive anywhere. I run a MM K-member which is doesn't have much clearance and it fits...UPR QA1 ect have much more but, you may have to modify 3” Pipe through K member with other K members to run full exhaust. Open DP should work with all of them.
You will need pipe from throttle body to fender (Fender to Intercooler included) just about any CAI will work.
Here some pics…you can also go to my build thread to see more http://forums.corral.net/forums/turbochargers/1412909-01-saleen-turbo-build.html
Kit is still on car. Some photos are before and during the upgrades/Treadstone IC ect. if I find a serious buyer I'll remove it. $1900
Thanks
Last edited: