Feeler: 2004 redfire cobra vert.

Modenausa

Member
Established Member
Joined
Feb 1, 2012
Messages
197
Location
Tampa
Located in Tampa. Always garage kept. Newer tires and fresh brakes all four corners. New sway bar bushings and sway bar link kit. New steering rack bushings. Fresh mobil 1 synthetic fluid anywhere it could go. Rear end and trans fluid just flushed. Supercharger fluid just changed. Kenwood Dnx 7160 DVD touchscreen with Bluetooth and traffic updates. Steed tri ax shifter. K&N FIPK CAI. Upr 3.0 pulley and Diablo sport predator pulley tune and new belt. Comes with tuner and stock pulley and billetflo pulley puller. New NGK tr6 step colder plugs. Off road xpipe with MIL eliminators and flowmaster 40 series mufflers to chrome tips. Removed factory grey paint on wheels to reveal chrome throughout (pictured). Just clicked 80,000 miles and drives and pulls beautifully. No leaks, no smoke. Washed and waxed weekly. Car was stock besides the x-pipe when I bought it. Pulley has been on less then 2000 miles. Also have the upr 2.8 pulley but never put it on..has two small dents that you have to look for, one on driverside above the cobra emblem and one on pax rear quarter panel. Looking for $17,500$. Want to get a gt500.

4ab1deae.jpg


86b962a246473617f95f24165a9fd02c_zps6995a857.jpg


31609d5c67114183abe29424b69f02ee_zpsc782b045.jpg


b56e3b2ef068187040fc35ef856f0a0f_zps79a804b2.jpg


2898fcdeb8bae6f9cb318000d58365ba_zpsc062b075.jpg


58ee1020becffe7898854690f65f18c2_zpsf33f3849.jpg
 

Modenausa

Member
Established Member
Joined
Feb 1, 2012
Messages
197
Location
Tampa
Sub frame connectors came factory with the convertibles. Stock suspension. Never tracked or street raced. Only bushings that were changed are the sway bar bushings, steering rack and sway bar link kit. Both sides.
 

Users who are viewing this thread



Top