Fays 2 watts link and aftermarket rear swaybar

[devilish64]

Is anybody using an aftermarket swaybar with their FAYS 2 watts link? I know some don't clear the main support so I'm curious if there are any bars known to work. I Also have the sway bar relocation brackets if that makes a difference. Thanks guys!!

 

[89Saleen215]

FRPP doesn't work. I actually have just left mine off with no issues.

 

[08KR525]

Ive been thinking about adding the Fays 2 to my KR but it may not work with my KR specific differential cover and FRPP suspension then. Bummer.

 

[Catmonkey]

I'm running a Fays2 with BMR's rear adjustable bar which bolts to their relocation brackets. I've got the finned differential cover and installed the propeller bolt so the threaded end points to the rear.

 

[08KR525]

Thanks Catmonkey. I wonder if I could just use my same rear sway bar without any modifications?

 

[Catmonkey]

I ran the OEM bar for over a year with the Fays2. The middle of the bar would contact the watts link frame when the axle was at full droop. I would just disconnect the frame links when I was going to be working on the rear end.

 

[enormous]

I run the Ford rear FRPP sway bar unit without any clearance issue on my 08 using the Fays. I remember installing it with the suspension loaded after failure trying to install unloaded with the axle hanging.

 

[08KR525]

All excellent info. Looks like my next mod will be the Fays 2.

 

[devilish64]

Catmonkey just to be sure you mean this bar?

 

[Catmonkey]

Yep, that's the one. I'll try and snap a pic today.

 

[Fast Ford]

Here ya go. This is a great product from BMR with multiple adjustable options.