f/s gold weld magnum 2.0 big/little setup

modular89

Member
Established Member
Joined
Jul 2, 2008
Messages
448
Location
Oakland, TN
Up for sale is my big/little setup. The fronts are 17x3.5 with M&H 26/4.5/17 tires and 15x12 out back with 325/50/15. The rear backspacing is 7 inch. The wheels and tires both look brand new and have less than 1k miles. They have never been down the track either. The driver rear tire has a few cut marks from the fender, before i rolled them,but they are very shallow. I have this setup now with no rubbing issues. I have a 96-98 model SRA swap and they set pretty flush with the fenders. Trying to buy a twin turbo kit so I need a little extra cash. This setup was $3000 wheels/tires. Looking to get $2000. PM or text 901-849-5368 with any question.

010.jpg

006.jpg

009.jpg

003.jpg
 
Last edited:

modular89

Member
Established Member
Joined
Jul 2, 2008
Messages
448
Location
Oakland, TN
Im just gonna keep the car. I had a lot of tire kickers and I'm not gonna just give it away. So now I am gonna change it up a little bit.
 

modular89

Member
Established Member
Joined
Jul 2, 2008
Messages
448
Location
Oakland, TN
I did a little massaging for piece of mind but it wasnt necessay. I only had to roll the fenders to clear them.
 

sdg97232

New Member
Established Member
Joined
Sep 22, 2009
Messages
1,153
Location
panama city, fl
What brakes are you running in the rear if its the cobra brakes do the rears clear with no issues or is griding the calipers required??
 

modular89

Member
Established Member
Joined
Jul 2, 2008
Messages
448
Location
Oakland, TN
I would take $900 for the fronts. These would not fit on the irs they would stick out about an inch or so. I am running gt brakes in the back for clearence.
 

Users who are viewing this thread



Top